Jump to content
SAU Community

Low Boost Pressure


Recommended Posts

Guest Lojikl

Okay this has been bothering me for a while.

My boost pressure seems fairly crappy. Even when I hammer the accellerator the boost NEVER goes above about 3.5 on the standard boost guage, and I can feel that theres not much jump in acceleration.

I have a Pod filter and 3 inch cat back exhaust. My old 180SX used to hit 15 no worries,

Anyone have an ideas what might be going on here.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/13983-low-boost-pressure/
Share on other sites

If you want to increase the boost there are 2 way, bleed valve or an electronic boost controller. Some EBC's have a boost gauge built in (blitz dual sbc) which will tell you how much boost before manifold. The bleed valve is much cheaper but will spike so you'll need to get yourself a seperate boost gauge to read what boost you are running. Eitherway is effective, just dont run more than 13psi through the stock turbo. Plus if you still have the stock intercooler you wont be able to run that boost all the time without having some detonation when the temperature is warm. Comes down to how much you want to spend and how reliable you want it to be.

Nothing like setting my EBC to 12psi on a cold night like tonight and giving it a good fang on the way home from some crappy training session at telstra ;) Even with the stock cooler on a cool night like tonight I found I could run 12psi without much problems but with the front mount now it does seem to pull a small amount harder.

my r31 only reads around 3psi on the stock guage as well, fitting a better boost guage soon to suss it out.

rev210, in saying thats normal is the factory guage out or is the car just running bugger all boost?? cheers mate

with the stock intercooler and 12psi on a 30+ degree day the car would detonate when pushed hard because the intake temps were so high, detonation sounds like a rattling noise coming from the engine and will cause severe damage to the engine if you keep pushing it, if you hear it stop pushing the car and back right off. Now I can pretty much run 12psi on a hot day and push it hard without too many drama's but I dont like to.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...