Jump to content
SAU Community

Recommended Posts

I have decided to run another GB as i have friends and family who are interested at the same prices.

The prices are as follows if we can get 20 or more people:

Fronts only $300

Fronts and Rears $400

Package deal (fronts rears, wrinkle, nissan logos, handbrake and gear boots, centre console, material for door trims and parcel shelf) $600.

Postage last time was an issue so i will work with Ultimate to see how we can improve it, cost $30.

There are numerous threads on these covers from the first GB so have a look and talk to those who participated in the first one. Any questions PM or email me or post in this thread.

If interested post your car details as per below, make sure u specify whether 2 door or 4. There will be a second thread once we get 20 people to place specific orders. This EOI will run till 11th November and orders placed after this date along with payments. The whole process takes a long time, over 2 months so quicker we can get numbers quicker the covers will arrive.

1. Jetdat - Commodore VS

2. Jetdat - Commodore VS

3. Jetdat - S15

4. Jetdat - MX6

5. Xpeccen

6. Ol_mate R33 GTS coupe

7. Stageagirl - Stagea

8. R3LOAD - R33 GTS coupe

9. EuropeanGoddess - R34 GTt Coupe

10. Sigsputnik - R32 GTR

11. The Mafia - R33 GTSt coupe

12. Liquid Ice - R33 GTSt with R32 GTR fronts stock back

13. Powers Lacking - R33 GTSt

14.

15.

16.

17.

18.

19.

20.

Here are a few pics from the last GB

colourchart.jpg

leather1-1.jpg

cimg2689smallgf9.jpg

06-07-06_1524h.jpg

06-07-06_1523d.jpg

wazr32gtst_4.jpg

Link to comment
https://www.sau.com.au/forums/topic/140189-leatherette-seat-cover-gb2/
Share on other sites

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

put me down for a set of fronts and rears for a series 2 r33. black leather with red double stitching please.

is it possible to get the velour door trim style fabric as an insert for the middle of the seats?

cheers

haha you used my pic :)

What can they do in the way of euro cars? got a mate with a current model golf and current model astra both interested

Thanks

yeah hope u dont mind, it looks hot!!

they do some euros...i will find out for you if they do golf and astras...

put me down for a set of fronts and rears for a series 2 r33. black leather with red double stitching please.

is it possible to get the velour door trim style fabric as an insert for the middle of the seats?

cheers

ok mate i am putting you down for fronts and rears..

i will ask about velour inserts...but dont think so..

okai because i missed out on the 1st one i realli wanna get my hands on these but before that happens can i get a price on fitting? in melb...where did everyone get theres fitted? ill proberly lookn at the full package....fronts, rears, handbreak boot ect.

okai because i missed out on the 1st one i realli wanna get my hands on these but before that happens can i get a price on fitting? in melb...where did everyone get theres fitted? ill proberly lookn at the full package....fronts, rears, handbreak boot ect.

they will be fitting mine when they get back but dont really know how much..they did say $150 for seats but they havent told me how much for the whole package..

i can find out for ya..

Im very interested however i heard from the first group buy alot of the stuff was extremely tight to fit, or didnt quite fit properly... will this be the same with the second group buy?

Also can someone put together a mass collation of pics from the first group buy so we can see what looks like what. Make it LOADS easier to pick what we all want and probably also make it alot more appealing too!!!

they are very tight for a reason, so that they dont look like conventional seat covers i.e all saggy and loose...

this wont change and i wouldnt want it to change either. if you dont wanna fit them yourself you can pay auto trimmers to fit them for you..

I got my interior in the first GB and I was extremely happy with them.

The covers fit like a glove and completely upgaded the whole interior

Fitting them is not hard at all just time consuming

Hi mate, from the pics of the last GB these look really good. Can you put me down for front and rear seats plus door trims, center console and handbrake and gear boots for a s1 R33 gtst 2 door. :)

Edited by R3LOAD

I'm interested in a full kit, but I'd love to see more pics of other colours, and yeah, does anyone have a suggestion to what colours would suit a Silver R33?

Also, what are your payment options?

PACKAGE DEAL!

User: EuropeanGoddess

Car: 1998 R34 GT-T (Series I)

Front Seats:

M001 Outside (Black) & M002 Inside (Red)

Red Double Stitching All Over Please

Rear Seats:

M001 Outside (Black) & M002 Inside (Red)

Red Double Stitching All Over Please

Wrinkle Front: Yes

Wrinkle Rear: Yes

Logo Embossing Front: Yes (Nissan Logo)

Logo Embossing Rear: Yes (Nissan Logo)

Handbrake Boot: Yes, M001 (Black) with Red Double Stitching Please

Gear Stick Boot: Yes, M001 (Black) with Red Double Stitching Please

Centre Console: Yes, M001 (Black) with Red Double Stitching Please

Parcel Shelf: Yes, M001 (Black)

Door Trims: Yes, M002 (Red)

Postage: Yes, Brisbane

Thanks.

Hi mate, from the pics of the last GB these look really good. Can you put me down for front and rear seats plus door trims, center console and handbrake and gear boots for a s1 R33 gtst 2 door. :(

Cheers mate, i have put you down..

Can they do R32 GTRs? I'm not sure how they'd do the headrest...anyone have any pix?

FYI For everyone else, here's an info thread:

http://www.skylinesaustralia.com/forums/in...howtopic=127322

a few more photos:

http://www.skylinesaustralia.com/forums/in...howtopic=133389

and two install guides:

http://www.skylinesaustralia.com/forums/in...howtopic=124841

http://www.skylinesaustralia.com/forums/in...howtopic=132537

Hey mate;

They do R32 GTR, there were a couple in the last GB i think...so for now i will put you down, you can confirm later if you like...

and i believe these are R32 GTR fronts..

103_1024.jpg

I'm interested in a full kit, but I'd love to see more pics of other colours, and yeah, does anyone have a suggestion to what colours would suit a Silver R33?

Also, what are your payment options?

Hi Jono;

I will try and get more pics of colours etc..i will put you down for now, u can confirm later..

The payment is to be direct deposit into their account before they start making the covers, but only after i give the go ahead..

If anymore q's dont be shy to ask.. :(

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...