Jump to content
SAU Community

Recommended Posts

I'm considering buying this one but from what I can see it only has one inlet and a breather to vent to the engine bay, thus making it as illegal as my current cheapass crankcase breather.

Autospeed have an article somewhere on how to make your own, should cost less than $50 but doesn't look as good as the above one.

Link to comment
https://www.sau.com.au/forums/topic/14022-oilair-seperator/#findComment-281045
Share on other sites

A catch can or oil/air seperator will also prevent oil vapour from coating the inside of the coola - this will reduce the coola's efficiency. When I got a front mount, i noticed that the inlet side of the stock one had a black film on it - not good.

MIght be worth considering too, that if you fit a catch can that vents to amosphere (rather than plumbing back) it is illegal from an emissions point of view.

Link to comment
https://www.sau.com.au/forums/topic/14022-oilair-seperator/#findComment-282083
Share on other sites

  • 1 month later...
Might be worth considering too, that if you fit a catch can that vents to amosphere (rather than plumbing back) it is illegal from an emissions point of view.

Bang on.

As well as being illegal, it will also make your car smell like a 1970 HQ Kingswood which is not very pleasent.

in terms of catch cans what is too loook out for.

does size matter with them, or is it all in the design

They are simple in operation and will have two connections, think of it as "line in" and "line out". For it to be effective there will have to be adequate baffling in between these lines, otherwise the same oil you are collecting will find its way into your inlet.

Do a search on Autospeed and you will come across articles like this one which will explain it better.

Link to comment
https://www.sau.com.au/forums/topic/14022-oilair-seperator/#findComment-347121
Share on other sites

From the ease of maintanance point of view, bigger the unit better it is. The bigger units would also work more effectively as well, depending on what you do with your car. The downside however is the difficulty in finding a proper spot for a big catch can.

ARC make an awesome one that replaces your windscreen washer bottle, but they are quite expensive. Getting a custom one made on the same principle would be a lot cheaper and should be looked at.

Link to comment
https://www.sau.com.au/forums/topic/14022-oilair-seperator/#findComment-347177
Share on other sites

  • 3 years later...

The idea behind the seperator is to remove oil fumes and vapour from the air (blow by) from the crankcase before it re-enters the engine to be burnt. In order to get the seperator to work to its best, it needs to do a few key things.

1. The seperator needs to be of large enough internal volume to slow the air stream which is laced with the oil fumes. The slower air means that there is enough time for the larger oil fumes to 'stick' to something and create a droplet. These droplets help 'grab' smaller droplets and removes lots more oil.

2. The seperator needs to have a massive amount of internal surface area. Buffles are not usually good enough to 'scub' the oil from the air. It is recomended that the seperator is filled with a substance that is not able to be disolved by petrol or engine heat. It also needs to be able to add a huge amount of surface area to the device. I use stainless steel wool (usually from under the sink).

3. In order to stay within the letter of the law, the EPA require that ALL air from the engine MUST be burnt. Oil/ air seperators, BOV's everything. So, the seperator needs to be reconnected to the intake tract.

4. For cleaning purposes, it is best to have a sperator that is easy to drain and clean. some use a drain hole in the bottom of the canistor which goes back to the sump. I just pull mine out and clean it everytime i do an oil change. I was amazed how much oil it caught!!

Any other thoughts.. :P:huh:

Link to comment
https://www.sau.com.au/forums/topic/14022-oilair-seperator/#findComment-2917485
Share on other sites

ohh, i forgot.. some people use scotch brite pads to fill the canistor :P:huh: . These work very well as well. For an even more serious effort, u can fit the scotchbrite into the vent flutes inside the rocker cover. this helps keep the oil in the engine to start with.

Be warned: make sure there is no way that the scotchbrite can be dislodged! this would be fatal to the engine. Also don't jamm it in there damn tight, otherwise it wont be able to breathe. :)

Link to comment
https://www.sau.com.au/forums/topic/14022-oilair-seperator/#findComment-2917501
Share on other sites

Not bad...lol..Bringing an old thread back to life r we psi. :P

Yeah, it's good to have a bit of technical input, so you know what you're looking for when buying (or building).

And guess who has got 6 stainless steel catch cans in a production line sitting on the shelf just waiting to be bought.

No. 1 and 2 have already been sold, one to PSI himself and one to me!

Only 4 left.

Edited by 3intheBack
Link to comment
https://www.sau.com.au/forums/topic/14022-oilair-seperator/#findComment-2917812
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...