Jump to content
SAU Community

Recommended Posts

Hey Liz, thanks for a positive reply. (just realised i keep posting under my b/fs login, lol)

At the moment the car is getting another gearbox put in as the other was rooted... hopefully getting replacement boot and cd player today also.

No drift for me at the moment, but will be learning as soon as there is a prac day at Mallala im sure.. however i know that my car is horrid to drift, no angle at all, needs better handbrake and diff.

Link to comment
https://www.sau.com.au/forums/topic/140325-my-r31/page/2/#findComment-2642567
Share on other sites

If your going to transplant any RB I would start with an RB25DET , they make a lot more torque than an RB20DET and are dimensionally almost the same . If you want to build hybrid RB30DET's thats fine but to do it properly is expensive mainly because the compression ratio is a bit low at ~ 8.3 to 1 . Also there are limits to how much you can get out of NA RB30E pistons .

I'd forget about the RB20DET in a car as heavy as an R31 . Unfortunately you will also come up against handling limitations with strut front and unequal length trailing arm/panhard rod controlled live axle rear suspension . Without major mods you cannot stop the rear steer effect and even if you get around that the unsprung mass makes axle tramp an issue - thats without very expensive competition grade dampers .

Power beyond handling limitations and traction is a waste - a hard and expensive lesson to learn . Thinking about it I would try to enhance the RB30E with the GTS cam/computer/Nismo extractors and have a bash at driving the thing rather that doing major feats of re engineering . You may get to have a lot of fun without spending all your money and time working on it .

Cheers A .

Link to comment
https://www.sau.com.au/forums/topic/140325-my-r31/page/2/#findComment-2647347
Share on other sites

isnt it funny how everyone bags the 20

im on my 3rd (yes read it 3rd) rb20, and ive never thought otherwise. first one was a clapped out redtop nics mated to my auto, then i had a silvertop (which abruptly died too :laugh: ). 3rd time lucky, got a silvertop, mated it to a gtst auto till i blew the auto. gone manual and never looked back. you learn to drive around the lack of torque, and i do tow loaded trailers with my car too (hence the big f**koff towbar i have). since gettin the minispool ive noticed the axle tramp more, but thats easily cured for me with some new rear suspension bushes.

Plus in SA a 20 is now classified as a "Bolt In" engine swap, which just requires an engine number change. No ID check, no Regency inspection and no engineers report needed. 25 requires minimum of 33 GTST brakes and booster (straight away engineers report needed because you change the booster). To do a VLT setup (when i checked the specs) technically you're supposed to hav GTS front brakes as minimum, but i havent seen anyone go thru dramas with stock brakes.

Just my 2c, from someone who sticks up for the 20s amongst us. Plus if 20s are so torqueless, how come a 31 with a silvertop, stock turbo, stock boost, sidemount and 3" exhaust can beat a 33 with front mount, 3" exhaust and essentially a better turbo?

Link to comment
https://www.sau.com.au/forums/topic/140325-my-r31/page/2/#findComment-2665697
Share on other sites

there are limits to how much you can get out of NA RB30E pistons .

There are limits to how much you can get out of anything.

The stock pistons are quite capable of handling 250+kw

If you're aiming for anything higher than that, you'd probably replace them anyway.

Link to comment
https://www.sau.com.au/forums/topic/140325-my-r31/page/2/#findComment-2665918
Share on other sites

Matt, saw your car out at Lala on the weekend.. looks great, the white wheels really made it look good.

Simon is claiming my radiator since he has some weird dodgy one in his 32.. so we'll probably swap, but since im not drifting (yet) it shouldn't matter.

Link to comment
https://www.sau.com.au/forums/topic/140325-my-r31/page/2/#findComment-2670263
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...