Jump to content
SAU Community

Recommended Posts

I cram, i line up the 4 cans of red bulls stay up till 4 sleep till 8:30 rush to school. its all good. english was a breeze lets hope all th other will be to. Woot go general maths!!

I doubt i will get a UAI higher than 75 :laugh: and that if im lucky, you guys are prolly much better lols and far more apt for schooling than i am.

Good luck to ya'll again. Holy crap its 3am!! damn daylight savings!!!

Edited by r33_taiju
Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2623155
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

I want your brain

No you don't. Trust me... LOL

I can't be too smart, I finally finish school, and lock myself in for a minimum of 4 years at uni, and most likely going for 7. I SOOO should have taken a year off!

As for studying. I'm meant to be studying for my uni maths right now... but I can't be arsed...

Meh, I might go mow the lawn... Some time soon I will anyway.

Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2623402
Share on other sites

Bah younguns

/walks off to study for uni exams

Good luck >_<

agreed - younguns

Got my final exams tommorrow and next wednesday. Accounting theory man - what the hell is that all about!!?!?!?!?? the words in that subject, I have never seen in my life! :P

good luck to the HSC guys & gals though >_<

Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2628096
Share on other sites

Na you'll be sweet the SC is a breeze, you really dont' have to study or anything i walked in on a year of stuffing around and got in the 80% for all subjects, it's piss easy man all my mates went good as well. Just think though, if you plan to stay on at high school then your SC isnt' worth the paper it's printed on, once you get your HSC (assuming you stay on) the SC is useless.

How did you guys find maths yesterday???

I thought it was a pretty fair test, but how shitty was question 28 (the last one) =/

Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2632371
Share on other sites

Bahahaha... SC... ROFL

I shitted around ALL of yr 7-10.

Walked out with two Band6, two band 4, and a band 3 (The band 3 was 1% off a band 4) ROFL...

I suck MAJORLY at english, and I was like, so hating it, and I still managed to pull out and basically beat nearly EVERYONE in my school at english... ROFL...

Oh, and I didn't study for it either.

SC is piss easy.

HSC that one needs a little bit of study to do well in.

My uni exam, that I have on friday, if I don't get off here I WILL fail... :rofl:

Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2632966
Share on other sites

If you ever get a negative in a loan repayment, just slip another negative in somewhere to make it right... ROFL...

Man, so glad my uni maths exam is now over! Fudged a few questions up, made a few marks up elsewhere... Here's hoping I pass this course...

Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2639576
Share on other sites

I finish on the 10th...lol all my mates are all done, I still got IT and art to go... man if I get into this graphics course, only 65 my dads getting me an r34 gt25.. but I missed 2 exams due to being in hospital, English and ancient history, I did maths, think I got around 75-80 in that, and for it and art im predicting around 75-80 also due to the amount of study ive done, and my trial results for those wernt to bad, 75 each.. my trials for the exams I missed suckkked though both 54, rank 47/118 for English, and 8/9 for ancient (keep in mind those other 7 guys are top 7 in the year like for all other subjects)... what do u guys think my chances are of pulling a 65-70 with these marks.. :O

English standard: trial 54 (assessments are better) :laugh:

Ancient hist:54 (assessments alot better) :D:D

Maths Gen: 75 (guess for HSC mark)

IT: 80 (guess for HSC mark)

Art: 75 (guess for HSC mark)

lol pllzzzzzz tell me SAM (uai estimator) is not accurate. predicted 54

:):(

Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2642890
Share on other sites

I finish on the 10th...lol all my mates are all done, I still got IT and art to go... man if I get into this graphics course, only 65 my dads getting me an r34 gt25.. but I missed 2 exams due to being in hospital, English and ancient history, I did maths, think I got around 75-80 in that, and for it and art im predicting around 75-80 also due to the amount of study ive done, and my trial results for those wernt to bad, 75 each.. my trials for the exams I missed suckkked though both 54, rank 47/118 for English, and 8/9 for ancient (keep in mind those other 7 guys are top 7 in the year like for all other subjects)... what do u guys think my chances are of pulling a 65-70 with these marks.. :(

English standard: trial 54 (assessments are better) :)

Ancient hist:54 (assessments alot better) :huh::sick:

Maths Gen: 75 (guess for HSC mark)

IT: 80 (guess for HSC mark)

Art: 75 (guess for HSC mark)

lol pllzzzzzz tell me SAM (uai estimator) is not accurate. predicted 54

:(:(

You can't extimate your UAI.

With the marks I got in the SC, I got a 79, I looked it up, using the exact same marks, if I'd done the HSC 3 years earlier, I'd have had a 95+ UAI.

Each year, the marks sway differently. The UAI is worked out, on a whole of how you went, compared to everyone else.

Link to comment
https://www.sau.com.au/forums/topic/140557-hsc/page/3/#findComment-2643061
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...