Jump to content
SAU Community

Recommended Posts

Hey guys so I had my future skyline checked over today by TopRacing "Must say Awsome company, easy to deal with and willing to give you their time"!

Ok so heres the deal: The found nothing majorly wrong with car except few minor wiring problems! Ignition is fueling when switched to accessories 'instead of 2 secs stop it is continue to pump fuel' kinda dangerous but easy fix! 4th gear grinds a little bit with quick shifts! apparently an easy enough fix

The Problem 'Compression ratios' 150 145 140 140 135 125? The guys say its not that unusual and the car could last quiet a bit longer without any problems? Any opinions would be greatly appreciated as i am purchasing vehicle on satdy!

They quoted me about $4000 to completely rebuild engine (stock internals 'no forgies) does this sound right?

Is there any other ways around this?

So anyway I was able to negotiate with seller and he has knocked a further $2000 of the car! which I feel is fairlly reasonable? I love the car and it seems this is the only future prob i may be faced with!

Would greatly appreciate opinions?

Cheers,

Dan

Link to comment
https://www.sau.com.au/forums/topic/140578-compression-ratios/
Share on other sites

Hey guys so I had my future skyline checked over today by TopRacing "Must say Awsome company, easy to deal with and willing to give you their time"!

Ok so heres the deal: The found nothing majorly wrong with car except few minor wiring problems! Ignition is fueling when switched to accessories 'instead of 2 secs stop it is continue to pump fuel' kinda dangerous but easy fix! 4th gear grinds a little bit with quick shifts! apparently an easy enough fix

The Problem 'Compression ratios' 150 145 140 140 135 125? The guys say its not that unusual and the car could last quiet a bit longer without any problems? Any opinions would be greatly appreciated as i am purchasing vehicle on satdy!

They quoted me about $4000 to completely rebuild engine (stock internals 'no forgies) does this sound right?

Is there any other ways around this?

So anyway I was able to negotiate with seller and he has knocked a further $2000 of the car! which I feel is fairlly reasonable? I love the car and it seems this is the only future prob i may be faced with!

Would greatly appreciate opinions?

Cheers,

Dan

hi mate, there is quite a bit of difference between those pots sounds a bit tired. normally 5-10 is ok, but anything more isnt crash hot.

has there been much work to car? wat boost it running? or what was it running.. wat kms has it got on the clock?.

just did mine the other day, mines done 170k+ now,

and mine was 175-175-175-175-175-175

hope that gives ya some insight. good luck :(

hi mate, there is quite a bit of difference between those pots sounds a bit tired. normally 5-10 is ok, but anything more isnt crash hot.

has there been much work to car? wat boost it running? or what was it running.. wat kms has it got on the clock?.

just did mine the other day, mines done 170k+ now,

and mine was 175-175-175-175-175-175

hope that gives ya some insight. good luck :devil:

Cheers for reply!

Car has 140000km on it, Boost controller running a bar when switched on!

New FMIC, new fuel pump, radiator, clutch the guy has $13000 in receipts with car!

Those compression ratios are awsome is it a rebuild???

Yeh im reconsidering now instead of him knocking $2000 off i might put it to him that he needs to knock $3000 off?

$16-17000 car with rebuild I believe would be fairlly good value, and least you have reassurance that internals are spot on!

I find old skylines will have corroding head gaskets problem..I got quoted around the $4000 to set things right as well...most ppl in this forum said it can be done within $1000.

Yeh Im thinking Gasket to! But for $4000 may aswell do a rebuild; chuck in the forgies + bore what extra $1500-$2000 still thats a lot more then I have atda moment!

$1000 what would that get you? Do you mean as in cut the 20 odd hrs of labour out ($2000), shit id be exstatic if I could get out of it for $2000!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...