Jump to content
SAU Community

Recommended Posts

That sux i missed the dyno day!

Does anyone know where i can go to do 2 dyno runs (low boost and high boost) on the sunny coast that is reliable and not a rip off???

Thanks.

well there is chapmans at cooroy, ron hill automatics also have a dyno, barnes high performance have one aswell. there is probably a few more but i cant think of, if u just want a power run then go to any of them, tuning is a different story i think.

Some mates of mine were chatting the other day, and they asked me why they have not seen any of the sunny coast cars at the skid days I run in Gympie.. I had to be honest with them and say I don't know!

could somebody fill me in?? After all, it is in your back yard.

I wont be upset if you don't like that sort of thing, but i would like to give them something..

cheers

Edited by psi
Some mates of mine were chatting the other day, and they asked me why they have not seen any of the sunny coast cars at the skid days I run in Gympie.. I had to be honest with them and say I don't know!

could somebody fill me in?? After all, it is in your back yard.

I wont be upset if you don't like that sort of thing, but i would like to give them something..

cheers

We've been going to the Cooloola Car Club days as they have been holding Motorkhana events with a point system... If you read the link below, you'll see why I PM'd you about wether you held a Motorkhana points system event as well.

http://www.skylinesaustralia.com/forums/in...=172257&hl=

Hey guys, i really want/need a new front bar for my r33, cause the stock one looks meh... and i want to fit an intercooler.

Anywhere here in the sunny coast to pick one up? preferably like a msport style...

cheers.

try online traders and get one's shipped up by courier to noosa, that ya best bet, wont cost to much.

http://www.dmdtheimage.com

Thanks for that! Will get on to them today.

Bring on the msports front bar :)

ill be there fri sat & sunday morning & sat night too :bunny:

Didn't know one was on...

Not sure thou... iv'e gotta paint my rear calipers tomorrow, did the front last weekend, looks mint, blue calipers, gold wheels.

Whats crackin Daz???

Thanks for coming down to the dyno day, has been a while!

yeah it was a good day even though i got there late, but still was a few nice cars there. alot of us form up the sunny coast are heading up to noosa today to go watch the hillclimbs, and road circuits. should be fun.

not sure to be honest, get a group of us together and see where we go from there :rant: . its the BP next to the grammer school cause i know there is a few BP's in forest Glen. Will be waiting for approx 15min for everyone to turn up so get there on time!

Edited by Darkness_Ryda1
how did ya cruise end up going?

I went since they meet a couple of mins from my house. I stayed for about 10mins then left cuz commodores joined in and there was a lancer there who did a skid on the niklin way and thought it was cool. idiot! i didn't want to be seen with them and i left. dont know how the rest of it went?!? any one booked? lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...