Jump to content
SAU Community

Recommended Posts

just got it done through a mate at cox automotive, he charges what a normal mechanic charges $66/hr. + parts. takes 4-5hrs i think. depends on

lol, u got coxy to do it?!?!?!!!!!

i will c how u go, and if it is still in the gearbox ill get him to install mine

:)

just got it done through a mate at cox automotive, he charges what a normal mechanic charges $66/hr. + parts. takes 4-5hrs i think. depends on

4 to 5 hours to change a clutch, jesus.. i'd hate to be paying $66/hour for that. I know a mechanic who will put a clutch in for you for $50/hour. Has his own hoist at his house, i wouldn't trust anyone else on the coast with my skyline. Pm if you wwant his details.

yeah you can use the na cams but they are only fractinally better then originals, go the poncams and you wont look back :).

Ouch thought that might of been the case with the gtt but wasnt sure if your bro had on too.Hope this thread get more active for the coast, people might start to talk. :)

haha yeah.. pitty he did crash it.. but he learnt his lesson.. guess he was too young for a GTT.. 17 lol.. when i was 17 i had a GTR ahahaha.. but had 100times more experience than he did.

look chris we brought this thread back... more active than damn whoretown.. lol

be prepared to get welts,Its fun as but man last time i went i got a few beauty's.

shit yeah love paint ball.. not many good ones here in brisbane :worship:

4 to 5 hours to change a clutch, jesus.. i'd hate to be paying $66/hour for that. I know a mechanic who will put a clutch in for you for $50/hour. Has his own hoist at his house, i wouldn't trust anyone else on the coast with my skyline. Pm if you wwant his details.

4-5 hours on GTR clutch.. thats not right...

4 to 5 hours to change a clutch, jesus.. i'd hate to be paying $66/hour for that. I know a mechanic who will put a clutch in for you for $50/hour. Has his own hoist at his house, i wouldn't trust anyone else on the coast with my skyline. Pm if you wwant his details.

Let me guess marty. Oh and he doesnt like doin gtst or many gtr clutches as they are a bit heavy for one person to deal with since he works on his own, if you ever actually attempted it yourself you would know, i have done it and its not exactly the easiest to pull out and thats prob why it took coxy 4 to 5 hours.

haha yeah.. pitty he did crash it.. but he learnt his lesson.. guess he was too young for a GTT.. 17 lol.. when i was 17 i had a GTR ahahaha.. but had 100times more experience than he did.

look chris we brought this thread back... more active than damn whoretown.. lol

shit yeah love paint ball.. not many good ones here in brisbane :D

4-5 hours on GTR clutch.. thats not right...

Oh 17 shit thats pretty young these yuong boy behind something with a bit of power, bit like tryn to handle a woman at that age dont know what to expect and unpredictable :D .The boys are coming out of the woodwork now.

Hey Dazza thought i heard you the other arvo leaving cox work must of been just after you go the car back hey, i was in the area. I miss that rb sound :D

Hell yeah skirmish is awsome, actually thats and idea, maybe all us sunny coast boys should head out for a game or two one weekend, but in 6 weeks when i get back from holidays.Whos keen?? We might even ket you to Mark come up :cheers:

chris.. u knw u wanna get this. CLICK ME

You really got a thing for 32 gts still donch ya?

Sorry guys and "gals" we should go do skirmish one day.. would be good to catch up with all the skyline lovers and to get out of our cars and interact... and bruise each other. :P

Edited by R334door
Let me guess marty. Oh and he doesnt like doin gtst or many gtr clutches as they are a bit heavy for one person to deal with since he works on his own, if you ever actually attempted it yourself you would know, i have done it and its not exactly the easiest to pull out and thats prob why it took coxy 4 to 5 hours.

Yes marty, so why dont you go help him with the job then, or you could just stand back and pay someone else a mint to do it, hell its your money, tip it down the drain for all i care, just trying to help. Oh, and yes i've done the clutch in my gtr, done a 180sx clutch, done a 33 gts clutch, done a s1 s14 motor/box/clutch.. uhm done a como box.. so i'm a bit beyond " attempting ".

yea it suxxx...especially for driving. but not like it matters for me at the moment, i dont have my car, getting sprayed ;) yay! hopefully this weather clears up this weekend.

Edited by Darkness_Ryda1
You really got a thing for 32 gts still donch ya?

Sorry guys and "gals" we should go do skirmish one day.. would be good to catch up with all the skyline lovers and to get out of our cars and interact... and bruise each other. ;)

did u even notice what it was.? basically that is a R33 GTR in a 60kg lighterbody with a harsher :bunny: attessa with the best looking gtr body and in the best colour ever.. (appart from bayside) u knw u want it chris.. fark if i had the spare moolah ill snatch it straight up!.. seriously it is worth every penny and a grade 4 too

yea it suxxx...especially for driving. but not like it matters for me at the moment, i dont have my car, getting sprayed :banana: yay! hopefully this weather clears up this weekend.

wet weather is fun in 180sx lol.. soo light

hope ur panel shop knws what they are doin, if ther is moisture in the air when it is spray sometimes even in the booth lil bubbles can form under the paint after a while. its shit:domokun:

wet weather is fun in 180sx lol.. soo light

hope ur panel shop knws what they are doin, if ther is moisture in the air when it is spray sometimes even in the booth lil bubbles can form under the paint after a while. its shit:domokun:

hmm well he specialises in paint and repair, he is only a small business by the looks of it but im sure he'll do a good job. Plus if i get any problems ill just take it back and get him to do it again :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...