Jump to content
SAU Community

Recommended Posts

use a beanie. checkout the drift mags, all their resoviours have beanies on

does is really work..?? hmm i didnt think about shielding i was more thinking about fitting a tranny cooler onto the PS lines..

cause i boiled the PS fluid today.. got a max of 90 oil temp on engine.. and a rattle comes from the PS pump after a few runs. ther is a lil rattle from the pump after a long drive too.. only when PS fluid is warm.. think it is time to flush... haha

lol, u guys are funny to listen to.

yea im gonna weld on my ssq bov, via its adapter (duh) rofl.

like this

post-40676-1191412538_thumb.jpg

blow off valve? what bov officer?!

lol

come on dan.. u knw u wanna run no BOV and just get chatter.. my bov is set on hardest and i get mean flutter unless im absolutly caining it..

which is fully sick uleh and gets all the hondas reved up.. speaking of hondas.. on the way back from the track.. i came up behind a blue civic with plates 50HCT... the rear control arms wer cusco's colour.. and had exhaust.. so came up next to him only to have him flutter at me rev pop second and take off... bahaha VTEC KICKED IN... vtec turbo yo

why dnt u just get a adaptor for the standard position..?

lol

come on dan.. u knw u wanna run no BOV and just get chatter.. my bov is set on hardest and i get mean flutter unless im absolutly caining it..

which is fully sick uleh and gets all the hondas reved up.. speaking of hondas.. on the way back from the track.. i came up behind a blue civic with plates 50HCT... the rear control arms wer cusco's colour.. and had exhaust.. so came up next to him only to have him flutter at me rev pop second and take off... bahaha VTEC KICKED IN... vtec turbo yo

why dnt u just get a adaptor for the standard position..?

lol, names not dan. yea it would be sick to have a dose going [u dont know it, look on utube]. ive already got it in stock position and adapter. but due to highmout setup, i have to get a front facing plenum, which = custom welding and shit. because ur removing the crossova pipe u hAVE to weld on the bov.

also im puttin the afm in the intercooler pipe, before it, so u cant see it = hello bellmouth turbo :P

lol, names not dan. yea it would be sick to have a dose going [u dont know it, look on utube]. ive already got it in stock position and adapter. but due to highmout setup, i have to get a front facing plenum, which = custom welding and shit. because ur removing the crossova pipe u hAVE to weld on the bov.

also im puttin the afm in the intercooler pipe, before it, so u cant see it = hello bellmouth turbo :P

or use a MAP SENSOR.. time for a dejetro i think...

well the blitz skyline uses/used the afm after the cooler.. that thing puts down 500hp with a GT500blitz turbo...

ur name is daniel correct.. then ur nice name is dan... end of story..

lol, yea u like that dont u

for those of u with ceramic or plastic wheels

U DONT WANT TO KNOW HOW THEY DO THAT

BAAAAAAAAAAAAAAAAAAADDDDDDDDDDDDDDD IDEA

but is = = =ROFL only on a vl from da hills

Edited by r33cruiser

lol, yea u like that dont u

for those of u with ceramic or plastic wheels

U DONT WANT TO KNOW HOW THEY DO THAT

BAAAAAAAAAAAAAAAAAAADDDDDDDDDDDDDDD IDEA

but is = = =ROFL only on a vl from da hills

LOL RB30DET...

that has more wank factor than that CIVIC VTEC TURBO that wanted to run me..

does is really work..?? hmm i didnt think about shielding i was more thinking about fitting a tranny cooler onto the PS lines..

cause i boiled the PS fluid today.. got a max of 90 oil temp on engine.. and a rattle comes from the PS pump after a few runs. ther is a lil rattle from the pump after a long drive too.. only when PS fluid is warm.. think it is time to flush... haha

Id do what youand buy one of those coolers and plumb it in.Doesnt have to be huge as long as it has a bit of direct air goin on to the core.

Id do what youand buy one of those coolers and plumb it in.Doesnt have to be huge as long as it has a bit of direct air goin on to the core.

hmm ok.. i think i might run the cooler before the pump inbetween the the resivour...

ill try a flush before.. and see how it goes..

Well if your interested the next general motorkhana is on november 18th down gympieland.

For this one it's $30 entry and you have to have some sorta of racing licence and a road registered car. You don't get as much track time though as there are between 40-50 entries for the day. But i kinda like watching the others inbetween filling in time. You learn what not to do!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...