Jump to content
SAU Community

Recommended Posts

Sweet! suck to all of you who dont have 5 yo socks! btw...free right?!

nah got them from the phils 5 years back.. they are fila brand and have lasted me 5 years.. top stuff i say.. cost around $3 a pair.. :)

oh well im off to coast cruise cya sunny

haha cruiser dont u start me on GTR's. they kick any cars out there especially rx7 :P. haha u have some balls to say that on SAU, or just no brains hahaha..naughty naughty...ima have to knock some sense into you :domokun:

i got balls.. STANDARD R32/33 GTSTs SUCK ANUS... ther i said it...

they suck... suck worst than a CA18... i woud rather a CA18 180sx than a R32 GTST...

man theres no denying it.

r34gtr= 280hp

0-100 in 4.9

3395kgs

and is 4wd = nooooooooo

s8=280hp

1205kgs

0-100 in 4.6sec

and thats the 13b !!!

20b=320hp on 10psi

1205kgs.

sry cant find weight

30b= couldnt be bothered looking, but is triple turbo. oh yea

now u decide, rx7 or the common gtr?

ive made my choice :domokun:

i got balls.. STANDARD R32/33 GTSTs SUCK ANUS... ther i said it...

they suck... suck worst than a CA18... i woud rather a CA18 180sx than a R32 GTST...

haha its ok, i dont like 32's :domokun: . Dun care wat u all say anyway... R34 GTR's kick ass and look about...1000000 times hotter anyway. in fact...i wouldnt even take an rx7 for free just to show all u guys up :P...ok i take it back..id take it for free and sell it.

GTR ANYDAY!

Edited by Darkness_Ryda1
This is me relaxed :domokun:

Sounds like you have a big night on your hands Chris. Congratulations!!!! :P

Well our engagment party went off...but i payed for it today.I was sooo hungover ive only just got out of bed.

Ok... I am putting an end to all of this....

Think......GTR Z-Tune....Ultimate street machine...Can't beat that....Mazda out the window.

Anyone heading out this arvey?

Remember...GT-R Z-TUNE

haha oh snap to you all!

i am ashamed, u all want a gtr, but we have shown that the s8 is on another playing field

furthermore the z tune is a limited manufactured vehicle.

i tell u what, when u find one and have enough money for one, come back and we will suggest a ferrari f430 again.

rofl narrow minded skyricers

shame on u cruiser..how can u be talking like this and u own a r33 urself! ur a traitor :domokun:

thats right i do own a r33, and now that ive had a skyline, i want to move onto bigger and better things.

lol, u guys are worse that vl commonhore guys. there are other more powerfull cars out ther.

now the z tune is a good car but, why get one when u could get a ferrari for the same price?

another major prob with a gtr is 4wd, not my cup a tea.\\

rx7- new seals, injectors, ecu, balance rotors=400kw

for a gtr to match that ude need forgies, pump, squireters......list goes on....

therefore, im gonna keep this r33 till i save up $20-25k for a S8

rx7- new seals, injectors, ecu, balance rotors=400kw

Now, I know where you coming from in terms of rotor performance and all. But you’re a bit naive to think your going to get 400kw that easy – Coming from someone who has had friends from BIG power 13b’s in the past..

Factor in the price of machining for the “bigger” apex seals your going to need, price for the port machining, price for the dowel’s an machining and all the parts, then manifold, turbo, misc ect.

In realty it’s still going to cost you the better half $12k - $18k for a reliable drive in drive out package of 400rwkw.

dude it has already been done.

evidence is there, google it

now if ppl want to spam, see the wasteland for all your spamming needs

Your a dick head.

Not on stock turbo's, without gas thats reliable

Go back to ausrotor an do more research kid.

No, I’ll be back seeing I live on the Sunshine Coast. Come debate in person, can’t miss me. I look like Barbie and can be seen in a black Porsche from time to time down your way.

You will not make 400rwkw, with basic upgrades that’s reliable without gas.

For someone who isn’t a “kid” your spelling and grammar is horrid.

Why talk up how awesome rotor’s are and how much power they can make if it’s not reliable?

I like rx7’s and I love 13b’s and 20b’s, however anyone can build a HUGE kw motor cheap. 400kw has been done on “stock” motor GTR’s. They last half a dozen run’s on the dyno, just like an rx7 would with very basic upgrades.

Edited by Nismo_Boy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...