Jump to content
SAU Community

Recommended Posts

board as hell, over tired over worked and under payed sums me up atm.

sounds like your havin an eventfull day as well Anna

Sounds about right!

hahah yeh you could say that, i've just finished watching a DVD of Hello Kitty. 5 fairytales each involving HK as the main character :P it was... interesting.

6:30 the garage will open so come round then nuthin like getting pissed in the dark under a dash

did you endup getting the gauge in waynes stag done over the wkend

see you at 6:30 mate

Yeah piece-o-piss pretty turned out as good as a $50 gauge can. The vacuum hose is made of hard plastic or something so kinks easy but it works and its stuck down with velco and we didnt bother wiring up the light for it cause wayne had to make it to the bank before they closed.

Sounds about right!

hahah yeh you could say that, i've just finished watching a DVD of Hello Kitty. 5 fairytales each involving HK as the main character :P it was... interesting.

wow anna i take it your not at work (lucky for some) then watchin fairytales and hello kitty dvds, hmmm! that somethin i havent done in a while

me im just getting frustrated trying to find the interior panels that theis prick car thiefs smashed in, it seems that no one has a 33 atm not to mention 9 out of 10 dont deal with interior parts brick wall after brick wall :D

wow anna i take it your not at work (lucky for some) then watchin fairytales and hello kitty dvds, hmmm! that somethin i havent done in a while

me im just getting frustrated trying to find the interior panels that theis prick car thiefs smashed in, it seems that no one has a 33 atm not to mention 9 out of 10 dont deal with interior parts brick wall after brick wall :P

Nopes, not working. I've now got Kath & Kim on. *sigh* I loves them so much :D they remind me of my mum and my aunty sharon.

Sounds like you're having a bit of a shitter today. I remember when I was ringing around looking for stock R33 suspension, just 1 mind you, they all wanted about $180 for it. I nearly died!

hey!! I quit my job today :no:

Looking for work in briz so if anyone knows of any, feel free to pm me.

I'm an accountant (Bookkeeper extraordinaire) so anything along this line of work would be awesome.

Also will be looking to meet up before the crusie on Sunday too.

Chow!

seems like the thing to do. I quit three weeks ago, just waiting to here back from some people for new one. There are plenty out there for the likes of us bookeepers. I went through about 7-8 agents in the city.

Edited by Traditimeour
gauges have to sit under steering wheel, gauges arnt gay unless there defis :(

lol.. what about autometer smoked faced.. i like them :santa: cost me $36 each and look like defis :santa:

Sounds about right!

hahah yeh you could say that, i've just finished watching a DVD of Hello Kitty. 5 fairytales each involving HK as the main character :no: it was... interesting.

sounds kind afruity.

hey!! I quit my job today :wub:

Looking for work in briz so if anyone knows of any, feel free to pm me.

I'm an accountant (Bookkeeper extraordinaire) so anything along this line of work would be awesome.

Also will be looking to meet up before the crusie on Sunday too.

Chow!

hmm thats what im studying for. got exams tomorrow and today.. far out i hate it. whats accounting like in teh real world..

seems like the thing to do. I quit three weeks ago, just waiting to here back from some people for new one. There are plenty out there for the likes of us bookeepers. I went through about 7-8 agents in the city.

whats pay like for us number punchers... its it worth another 6-12months of study..?

hey there is cheaper version of gauges called "auto gauge" isnt there , there a knock off of "auto meter" or are they all made by auto meter?? i dunno never really took much notice.

yep thats the shit. lol..

to be honest thats what i use. havent faulted them yet have installed half a dozen of ther boost gauges.. all good.

Blink: i had a job costing exam this morning..

and tomorrow i got cost budgeting performance reports and arvo i got financial statements.

GHEY..

A group of us are going to meet at the chancellor park woolies at 7:20 for a 7:45 departure to the main meet for the SCC if anyone else wants to join us, if you let me know your comin either pm me and i will give you my number or just indicate in this thread that your keen so we can get a rough idea of numbers so we dont leave with out you as we did last year

A group of us are going to meet at the chancellor park woolies at 7:20 for a 7:45 departure to the main meet for the SCC if anyone else wants to join us, if you let me know your comin either pm me and i will give you my number or just indicate in this thread that your keen so we can get a rough idea of numbers so we dont leave with out you as we did last year

Are you talkin about sunday? cruisin down to meet up for the MSC?

A group of us are going to meet at the chancellor park woolies at 7:20 for a 7:45 departure to the main meet for the SCC if anyone else wants to join us, if you let me know your comin either pm me and i will give you my number or just indicate in this thread that your keen so we can get a rough idea of numbers so we dont leave with out you as we did last year

Count me in.

Glad to see your earning your weekly pay check again Dan HAHA, what time did you start and your board already

Started at 7 already fixed someones laptop. Error between keyboard and chair. on my 3rd coffee already (each with 3 sugars). so im in this little storeroom of an office buzzing out of my head with nothing to do.

good pay once u got your paper! prob about 45-50pa in the city for basic bookkeeping.

What exams u got markimak?

7-8 agents? gezz u were on to it, u get a job?

Plenty of interviews, but I'm limiting myself to CBD out to home, which is towards Ipswich, so had to turn a few down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...