Jump to content
SAU Community

Recommended Posts

i had some stupid kids try that receipt trick on my car, where they put the receipt on your back window and when you get out they jump in and drive off. thankfully i was smarter then that and took my keys with me. so when they came near it i told them i would kick there ass if they went near my car again.

some people really have a nerve. so anyone know of any good alarm systems?

there black now. and yeh she is stock except the muff. let us know how much and ill check out my finances. my 18th is putting a pretty hole in my pocket at the moment lol. because i have rego, insurance and a party to pay for...its good fun. but let me know and i might hold off the trial body kit for anotehr month.

you can have the zorst for $120

In otehr words ill get it, but ill have to check it out first is all.

Just watch if the exhaust came off a coupe as the sedans are longer by about 60 to 70mm and the exhaust might be short, simple fix thought just get it extended.

I saw a guy from sau fit a exhaust the other day to a sedan ( one of the kit full exhaust of the net)and by the looks of things was supplied a coupe and he ran into drama's with the rear muffler sitting to far in and too close to the bumper which in time cause it to burn the bar.

yeh i know all about that, but dattoman knows i got a 4 door so he would know if it would fit or not. thanks for lettingu sknow thou

not unless her measured it and knew the length of a coupe and sedan exhaust,but good luck if it works sweet

Also not sure if 33's are the same as 34's but my sedan i got a nismo brand muffler and it apparently had come off a coupe but to fit the sedan it needed to be extended as mentioned above but also new brackets put in place as the fitment was not in the same location as coupe.

Just watch if the exhaust came off a coupe as the sedans are longer by about 60 to 70mm and the exhaust might be short, simple fix thought just get it extended.

I saw a guy from sau fit a exhaust the other day to a sedan ( one of the kit full exhaust of the net)and by the looks of things was supplied a coupe and he ran into drama's with the rear muffler sitting to far in and too close to the bumper which in time cause it to burn the bar.

yea that was me.

should be getting zorst extended next week.

Hey guys,

Just a quick heads up - we have a BBQ and Cruise happening this Saturday morning. EVERYONE is welcome! (we have 50+ names down to attend)

I know a few guys from the gold coast are head on up. Anyone planning to come down from the sunny coast?

if anyone is coming down, can one of you guys organise a meeting point so you guys can cruise up together?

We've got a breafast BBQ happening - arrive at 9am, start the cruise at approx 10.30, ending with lunch at the pub 12noon. For more info, check out the post in the event section -- here

an early start for you guys, but should be a good day!

well i dont know but im sure none of the guys actually read this in time and if they did they probably are already there. i cant go car is getting fixed, but sounds like a good meet up. P.S best place for sunnycoast ppl to meet for events is ettamogah pub, its just off the highway and is fairly central to everybody to go to meets.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
×
×
  • Create New...