Jump to content
SAU Community

Recommended Posts

Hi All

I recently purchased a car from [edited] in japan. It took more than 4 months for the car to get here after it was sent to the wrong port in Japan, then two days before the car arrived i discovered the chassis number i was given for the import approval was different from the car on the ship. It cost me another $200 for a new import approval (thank goodness it went through quickly) and storage on the dock while the approval went through.

I went to look at the car at the compliance workshop and guess what IT WAS THE WRONG CAR luckily it was pretty similar but i had to spend $2000 extra on fixing things broken and damaged.

[edited] promised to pay for the approval and dock mix up, which they didn't and when i asked them to pay for the damage to be fixed (as i was told the car was not damaged) they said they were checking and never got back to me.

So the car is hopefully on the road next week and wish me luck nothing else goes wrong

cheers Si

Link to comment
https://www.sau.com.au/forums/topic/140703-problems-with-a-company/
Share on other sites

thats f**ked. why did you even pay for the damage to be fixed? had you already paid for the full purchase price?

I had to pay for it to be fixed to get complianced and yeah i had already paid the price for car i guess i took a risk and got burnt thats life just wanted to warn others so it didn't happen to them, anyway looking forward to driving it next week hopefully its all ok on the road

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

This is the reason why you should always purchase cars through a compliance workshop rather than through one of the internet companies. While they offer good cars from time to time, in most cases it is too good to be true and car's are coming over with damage and missing parts they should have had. Buying car's through a compliance workshop in most cases works out to be cheaper and you can ensure that you will get a decent car, otherwise you have someone else to hold responsible for it.

Thats my 2 cents.

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

^^ probably dodgy compliance shops!!

go to a well known trusted one and you wont have any issues at all..

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

for sure... but its the bad ones that ruin it for the rest.

check out www.raws.org.au its a organisation for RAWS workshops, the ones that are members of this body are one's I'd deal with any day because they're by the book and can be trusted.

good to hear ...i joined this month :D

Bollocks, I've seen some compliance companies buy absolute rubbish cars with accident damage beacuse they can comply em on the sly and get away with it... (give engineer a bottle of scotch, turn him around 6 times and suddenly you've got a signature on the compliance paperwork).... then they turn it around and sell it to clients as totally pristine cars. Also most compliance workshops use japanese agents to buy cars from... just like everyone else.

Hence for that reason you should always use a well known and reliable workshop. Compliance workshops normally use the same agents over and over again to source them cars. So it is in the best interest of the agent not to find the cheapest car but the ones of best quality to ensure that they continue to be used.

In the case that the car arrives in terrible condition you have the workshop to be held responsible for incorrect information being supplied to the customer. A certain internet company (not j-spec) that many of my friends have bought R32's through have recieved cars with blown motors, blown turbo's, missing parts and severe amounts of rust. That said it was complied under the old 15 year rule, which allowd a lot of dodgy car's to make there way onto australian roads.

Yes I have seen cars been put on road by dodgy compliance companies but that said, a car imported by the workshop and then sold in australia abides under australian law. Also you can also get a third party inspection to ensure the car is in good condition. But when it's bought through an internet company, most of these companies have there contracts set so that if a car arrives in a different condition to the information supplied to there customer they cannot be held liable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...