Jump to content
SAU Community

Recommended Posts

Does anyone know of a good brand/model of tyre that grips fairly well in the wet? I've heard good thinkgs about Yokohama A539's but I don't remember seeing any comments about their wet weather capability.

Dry grip is also important, but not if the grip is sub-par in the rain. I also don't mind if the compound is slightly softer than normal if it has improved grip to show for it, but I'm not after the absolute best/softest/most expensive set. Preferably something below $200 per tyre.

Oh, and they also have to come in sizes 235/17/45 and 255/17/55, and Z-rated.

Is there a site reviewing different types of tyre? I found one sometime last year that was based in America, and it actually had figures submitted by readers, for grip, performance, noise, etc. But being in America most of the model numbers didn't match up to what we have here.

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/
Share on other sites

I don't think I can afford the Bridgestones :D

I actually had Marshal Power Racer 2 tyres put on the front a couple of weeks ago, they were $165 each, plus $10 or $20 each (I forget) to fit and balance them. Yeah, I'd never heard of them either :D

I only got them because I discovered that due to a bad wheel alignment my Nankangs were down to the steel belts (!) on the inside edges, which I never noticed when checking my tyres. I had virtually no spare money so I had to get the cheapest of whatever was available.

I'm not really sure how good/bad these tyres are. When I took the car out at first they were awful, but a couple of days later I discovered that the alignment I had done actually made the alignment WORSE! It was so bad, that on that shiny underground carpark concrete, the tyres would squeal like a bitch even in a completely straight line. They also feathered only after a couple of hundred k's. After I had the alignment re-done properly I never managed to push the car very hard. I'll see what happens this weekend if the weather fines up.

They seem to be ok for such a cheapass tyre, they've got that flange on them to protect your rims too.

The reason why I'm inquiring about tyres though is my rears are wearing thin and I was considering getting rid of the Marshals on the front and putting good stuff all round when the time comes.

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/#findComment-286204
Share on other sites

I got A539s fitted the other day 235/45 17 all round, and so far I think they are great. When I got the car it came with Federals and the A539s are light years in front of these tyres in ALL conditions. I really couldn't afford them at the moment but I can testify with this car and others you pay for what you get. One of the best investments in performance handling will come from your tyre choice. Make a wise choice!

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/#findComment-287020
Share on other sites

JimX: Nankangs :P I had them once on my last car, NEVER again!

On my last car (2001 Astra (FWD)) I found the best all round tyre (particularly in the wet) were GoodYear Eagle F1s. The only problem is they won't come in your width (or mine!).

I have Falken Ziex front and back on 18s and I think they are good in the dry but pretty average in the wet. I have 235s on the front and 265s on the back. Next time I'll try the Dunlop FM901s that Duncan mentioned.

Link to comment
https://www.sau.com.au/forums/topic/14172-which-tyres/#findComment-288946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...