Jump to content
SAU Community

Recommended Posts

hey guys..

can any one help me to find out the exact thickness and the diameter for front and rear rotors for

r34 gtr please guys..

need some information to see the diffrent between 34gtr and wrx stis...

thanks. :yucky:

hey guys..

can any one help me to find out the exact thickness and the diameter for front and rear rotors for

r34 gtr please guys..

need some information to see the diffrent between 34gtr and wrx stis...

thanks. :pirate:

Check out DBA website or this link... http://www.dba.com.au/dba_catalogue_2004/H...ogue_261006.pdf

hey guys..

can any one help me to find out the exact thickness and the diameter for front and rear rotors for

r34 gtr please guys..

need some information to see the diffrent between 34gtr and wrx stis...

thanks. :(

R33+R34 GTR's have the same front brakes as My02 on STI's , STI's have slightly larger rear rotors just like series II R34 GTRs have .

Edited by wrxhoon
R33+R34 GTR's have the same front brakes as My02 on STI's , STI's have slightly larger rear rotors just like series II R34 GTRs have .

well Ive checked my rear sti rotors and they are 316mm..

are you sure r34 ser 2 would be the same ?? and where can i get the from as brand new...

also would you know the size of the front r34gtrs rotors any numbers well help me :)

thanks man..

well Ive checked my rear sti rotors and they are 316mm..

are you sure r34 ser 2 would be the same ?? and where can i get the from as brand new...

also would you know the size of the front r34gtrs rotors any numbers well help me :(

thanks man..

Correct 316x20 for the MY02 STI and the series II 34 GTR is 316x22, series I 34 GTR =300x22, front rotors are 324x30 from memory or maybe 326x30. When i said the same i meant the same size GTR rotors won't fit STI , different PCD. My05 on STI's have the same PCD as GTR but i'm not sure that they will fit the part that goes over the hub maybe different size.

I dont have any part numbers, i could have a look on my car but you wouldn't want to buy rotors from Nissan i don't think.

You can buy aftermarket rotors much cheaper from any spare parts shop, just tell them what car you want them for and they will look them up for you . Keep away from Chinese made rotors ..

Is it R34 GTR you want them for ? If its series i you have i dont think you can use the bigger series II rotor without some mod to move the caliper further out ..

Correct 316x20 for the MY02 STI and the series II 34 GTR is 316x22, series I 34 GTR =300x22, front rotors are 324x30 from memory or maybe 326x30. When i said the same i meant the same size GTR rotors won't fit STI , different PCD. My05 on STI's have the same PCD as GTR but i'm not sure that they will fit the part that goes over the hub maybe different size.

I dont have any part numbers, i could have a look on my car but you wouldn't want to buy rotors from Nissan i don't think.

You can buy aftermarket rotors much cheaper from any spare parts shop, just tell them what car you want them for and they will look them up for you . Keep away from Chinese made rotors ..

Is it R34 GTR you want them for ? If its series i you have i dont think you can use the bigger series II rotor without some mod to move the caliper further out ..

its for my r33 gtr mate..

can you tell me where can i get the ser2 rear rotors please mate :(

iv'e tryd dba but they havn't got the r34 ser2gtr lested :( only the 300mm witch is for ser 1 i think...

cheers mate.. :)

Edited by sun33
its for my r33 gtr mate..

can you tell me where can i get the ser2 rear rotors please mate :)

iv'e tryd dba but they havn't got the r34 ser2gtr lested :( only the 300mm witch is for ser 1 i think...

cheers mate.. :)

They won't fit your 33 unless you mod the calipers so don't bother just get the 300 mm..

and where can i get the ser2 rotors from guys :)

thanks..

Project Mu via Greenline.

Autobarn were useless when I asked about DBA rotors. Still waiting (2 weeks) for a response from the local RDA dealer, so I've given up looking for a local product.

Project Mu via Greenline.

Autobarn were useless when I asked about DBA rotors. Still waiting (2 weeks) for a response from the local RDA dealer, so I've given up looking for a local product.

and are these ppl in here or overseas?? :P

any contact number >

thanks willo :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...