Jump to content
SAU Community

300rwkw Challenge

smok3y

By smok3y,
in General Automotive Discussion

 Share

Recommended Posts

DJ Brave Experienced

DJ Brave

Posted
Posted

It would be an interesting contest but i reakon that the skyline would have better final drive ratio than the commondore, giving it more acceleration. With the same, power in a lighter car, with better gear ratios i think the skyline would do it. But, obviously the commondore i would expect to have a fare bit more torque so as i said , it would be an interesting race.

It would be torque Vs ratios!

Busky2k Veteran

Busky2k

Posted
Posted

The VT will get a better launch thanks to an auto but if its a decent drag strip where you can go for at least 400m or longer, the GT-T will own the VT as its a good 300kg lighter.

Mind you 300rwkw VT Auto thats N/A is pretty hardcore.

Freddy Kruger Mentor

Freddy Kruger

Posted
Posted

theres a tone of factors. what mods to the diff etc of the VT? is it a series 1 or 2. is the transmission been kitted or anything? what tyres are they running?

what time would a 300rwkw r34 run?

oh and autos run quicker and more consitent times than a manual. :laugh:

yoshimitsu9 Contributor

yoshimitsu9

Posted
Posted

this would a very close race.

i can tell u guys now that the ls1 is going to be pumping 300rw/kw just by doing exhaust alone (my mates dad spent $3500 on extractors alone on his vt series 2 and the rest of the exhaust and got 300rw/kw) remember in europe and US ls1's come with 400bhp from the factory :)

and yes i would like to know what a 300rw/kw gtt would run

mitchy_ Grand Master

mitchy_

Posted
Posted
this would a very close race.

i can tell u guys now that the ls1 is going to be pumping 300rw/kw just by doing exhaust alone (my mates dad spent $3500 on extractors alone on his vt series 2 and the rest of the exhaust and got 300rw/kw) remember in europe and US ls1's come with 400bhp from the factory :)

and yes i would like to know what a 300rw/kw gtt would run

you sure?

ive seen alot of LS1's get 300rwhp from exhaust/intake/mafless tune, but not 300rwkw

yoshimitsu9 Contributor

yoshimitsu9

Posted
Posted (edited)
you sure?

ive seen alot of LS1's get 300rwhp from exhaust/intake/mafless tune, but not 300rwkw

hmmm maybe i remembered incorrectly. with the LS1 unlock theres ure 300+rw/kw(would be either europes or US's ecu map) right there. either way its shit cheap to get big power figures out of the ls1's

Edited by yoshimitsu9
Robo's Mentor

Robo's

Posted
Posted
also aussie ls1s are 5.7L compared to the yank 4.8L or whatever it is...

with an ls1 all you need is extractor exhaust intake and tune and youve got 250+rwkw easy as. not bad for $3k mods or so.

The problem with the Aussie Ls1's are the tune. Get a good tune, extractors and twin 2.5 exhaust and a decent OTR intake and you'll be pushing 250rwkw, good easy bolt on mods. Injectors won't give you anymore power. With cam will make you around 280rwkw.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Was that with the cas upside or correct way up?
    • nash47
      Cas issue

      By nash47 · Posted

      Did and sync timing with light 
    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...