Jump to content
SAU Community

Recommended Posts

I just got a pair of HKS GT2530's rebuilt with Garrett parts. I know that HKS put the oil restrictors in from the factory, but i've read that Garrett don't.

I ordered a HKS GTRS gasket kit from nengun, and that came with a oil restrictor. Sould I use it?

Thanks

post-5985-1162638221.jpg

post-5985-1162638281.jpg

Link to comment
https://www.sau.com.au/forums/topic/141833-turbo-oil-restrictor/
Share on other sites

I just got a pair of HKS GT2530's rebuilt with Garrett parts. I know that HKS put the oil restrictors in from the factory, but i've read that Garrett don't.

Garrett do, any Ball Bearing turbo correctly built/assembled will have an internal restrictor on the cartridge itself.

You cant see that till you pull it apart though. The pics you have an external ones.

I know the Garrett GT30XX series was a .8mm (if memory serves me correct) :(

And that was 2 years ago when i had it, so Garrett were doing it back then for sure.

Being Garrett make the HKS turbos aswell, i dont believe you have an issue.

They dont actually "put" them in.

If you saw the inside of the cartridge you would know what i mean, its on the actual bearing housing itself... so its like that from the production line.

Im sure MTQ will be able to explain in better english :(

I have heard with GT3540's some people have been having trouble with leaking turbo seals due to the high oil pressure run by some high performance engines, Garrett supply another oil restrictor smaller than the inbuilt one if people have trouble, not sure if you would need one or where to find them

No, as i said... There is a restrictor on the cartidge.

There is only going to be "X" amount going in there whether you run 50 restrictors or one before you get to the cart itself.

If you fit a larger restrictor before the restrictor on the cartridge, then obviously it will slow the oil/volume down to the core, but once it reaches the core its only going to let in what the internal one dictates anyhow so to my limited understanding of fluid dynamics, it makes no difference.

Contact MTQ and see what they say, but i never ran anything more than the internal restrictor for my GT30 and i had an N1 pump etc.

I could name a dozen others who have done the same with thier setups, not one has blown a seal or had adverse effects.

If the twin setup is different, i would like to know why :)

If you look at your second picture you can see the restrictor in the oil inlet hole . Its the hollow mushroom shaped gadget that needs an inverted flare fitting . All these GT25 BB centre sections have them , actually its the stem of the restrictor that does fore and aft location of the bearing pack itself . If its not there the turbine and compressor try to shunt backwards and forwards depending on which side has the greatest thrust load at the time driving its opposite wheel into its housing - not good .

I guess two restrictors can't hurt but I'd rather have the one only in the turbo because it has unrestricted flow to within a couple of cm of the bearings .

Cheers A .

  • 2 weeks later...

well up here in qld there have been a few people blowing seals out at the track...gt30s and 35s alike. Alot of people are now starting to run an inline restrictor that sits right before the cartridge one. I think its about 40psi of oil pressure is the max required for the turbo. Does that sound right disco?

Edited by r33_racer

I still havn't got round to contacting MTQ. been to busy doing other stuff on the car to worry about putting the turbo's on yet. I'll post MTQ's responce when I get round to ringing them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...