Jump to content
SAU Community

Recommended Posts

  • Replies 178
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

"...super fun happy sliders moments. They teach wet weather breaking, swerving and a few steering techniques to get you out of trouble. You have to do the higher levels in the AHG skidpan car for them to show you how to correct over/under steer.

Now that sounds like fun, :) but any time you can have a safe controlled environment to try out you moves must be a good thing

...Even Mr kleets had an off at the skid pan in his GTR :rant:... No damage and no curbs (besides the damage to Mr kleets ego :))

Yes, but it was all good fun..infront of dozen ppl from the club :laugh::rant: Vengence shall be mine when W.A. Suspension set up my circuit spec SK suspension package, or maybe i'll just run off into the scenery at a higher mph.

More info on these non-instructed skidpan days.. :)

Yes plz

As for the HICAS issue, find a diagram with the search button then crawl under the back end and look for the bar, 33's are easier to disable than my 32 and you can get the bar cheap cheap from a forum member

on the RAC report it sais "the rear steering system is inoperative"

haha id suggest you ring the RAC and ask for the mechanic to ring oyu, but it wont happen :S theyre useless

i tried that but i rang 3 times and he still never called.

saw this today trent was next to us nice ride nice paint i want those wheels on my car gtr stock rims are awesome

haha yea man ur plates stood out! Ur car looks bombd !!!

I didnt think you would realise it was me haha

but yea nice ride dude u kno how to exterior :verymad:

why cant I come to you if something happens? Coz im young?

lol im really having second thoughts about joining this club....

Also if you havnt read earlier, i saved up 15 grand myself, and my mum said she would match it. She wants to see me save up for something I would love to own. So i did, took a LONNG time.

Dont wish me luck, u dont mean it man. Just save it :)

well said dude!just drag every commonwhore driver thats whats a go and see them eat ultimate 98.i drive a skyline gtst auto,i cant drive manual cars because of a very dodgy left knee,but you get that :) my ride still goes alright with the basic mods,does 13'sec 1/4 for now,upgrading turbo next month with a highflow from sliding performane,hopefully run a mid to high 12 with good tune,good luck with the car dude :kiss:

The HICAS operates at speed and the rears are only steered through a very small angle of about 1 degree, out of phase to aid turn in.

It's not something the RAC guy is going to 'see' like he would on a Mazda where the 4WS works under 35kmh and has upto 5 degrees of angle change.

The HICAS operates at speed and the rears are only steered through a very small angle of about 1 degree, out of phase to aid turn in.

It's not something the RAC guy is going to 'see' like he would on a Mazda where the 4WS works under 35kmh and has upto 5 degrees of angle change.

Spot on rev210, on top of the fact that I wouldn't trust what an rac inspection says about an import in the first place :)

Yes, they will also do a compression test and a driver beat down.

:) , Samuel L Jackson style?. Beat down or reality check..its all in the language.

Its pretty simple, lock bar or no lock bar, hicas light or no light, slighly odd turn in to low-mid speed corners or not.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...