Jump to content
SAU Community

Recommended Posts

just have to be careful around around christmas as the police are out in bigger forces to protect *cough* raise revanue *cough*

Isnt the 24th a public holiday there usually isn't much traffic around :wave:

i'd be up for it Jarrad keep us posted if you need some help....

24th will be a sunday so it is do-able. May be a good day for it as most of the travellers would have already gone on friday nite/saturday. Christmas eve cruise hey, hmmmm.

Sorriy I cnat make he 24th, its my birthday

Pluss I worry that if something went wrong on the cruise it would ruin my Xmass, or if it went real bad could ruin everyones

Xmass (Just hate the thought of fatalities at that time of year)

Sorry Jazza i was joking....

maybe a bit earlier in DEC as most people has Christmas functions ect closer to the end of Dec

^^^^

I also agree with 4 door sleeper about the fatality thing maybe we could organise a dinner / movie night or something and organise another big cruise early next year like the Victor Cruise.

Edited by Whiplash

don't know if i can make a cruise. got cooling problems with the 33 :D won't have the money until next year to fix her up so won't be doing many miles or hard driving until then

so if theres a cruise i may have to catch a rdie if anyone has a spare seat

Sorry Jazza i was joking....

maybe a bit earlier in DEC as most people has Christmas functions ect closer to the end of Dec

^^^^

I also agree with 4 door sleeper about the fatality thing maybe we could organise a dinner / movie night or something and organise another big cruise early next year like the Victor Cruise.

Yeah sorry I think it was bed time when I wrote that post, wasn't really with it.

If people would prefer to wait till next year for a cruise that's fine as EMZ_33 is already having the charity cruise on the 9th, though that looks like it's going to be basically cruising around town for half of it before heading down to aldinga along highways, but it is for charity. I'll leave it open for further debate.

We can still have an SAU BBQ say at the Belair National Park as originally suggested at least. Anyone with other bright ideas are welcome to post them up :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...