Jump to content
SAU Community

Recommended Posts

I went to Murcott Driver's Training Lvl 2 last Monday. Put 38psi on my tyre all around (they recommend min 36psi on the day).

One of the instructor, Pete, told me during Lvl 1 course in January that there's nothing wrong putting 40psi all around, he always had that pressure on his car.

Manufacturers recommend lower tyre pressure like 32 or 34 is for comfort level, so they don't have to spend millions on designing limo smooth shocks on mass production cars, and easier to sell their cars coz when ppl test drive they feel the comfort ride, not a bone-jarring ride.

If you went any track day course, they would recommend min 40psi (cold tyre pressure) for performance and safety.

I think 40 psi is not too high, you'll get better fuel economy, longer tyre life, and don't believe if someone told you about the crowning effect, that only start to happens if you put too much pressure like 50 or 60psi and your tyre is extremely bad quality ones. The reason why I don't put 40psi is because I have to drive over tram tracks everyday, and with min 36-38 psi all around, the comfort level is acceptable.

I know lots of guys here are into drags, and some will think that anything above 30psi is already on the wrong side of the pressure scale. For drags you want lower tyre pressure to get that sidewall flex for better grip under extreme hard acceleration, but that will wear out your tyre quickly on everyday's use.

So unless you own a tyre shop or a best friend of them, pump up those tyres... I hardly noticed any difference in ride when I used to have 32psi and now 38psi.

Link to comment
https://www.sau.com.au/forums/topic/14205-tyre-pressure/#findComment-286598
Share on other sites

Originally posted by rs73

Manufacturers recommend lower tyre pressure like 32 or 34 is for comfort level, so they don't have to spend millions on designing limo smooth shocks on mass production cars, and easier to sell their cars coz when ppl test drive they feel the comfort ride, not a bone-jarring ride.

I got told this on an AAMI defensive course a few years ago.

I run my 18s at 40psi front and 38psi rear. I think my stockies (16s) were on about 35psi but they have been in my shed for a while! :P

Link to comment
https://www.sau.com.au/forums/topic/14205-tyre-pressure/#findComment-288939
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...