Jump to content
SAU Community

Recommended Posts

got to city west then had to leave, had an emergency to attend to :huh:

p.s. i heard there was engine revving at the second meet point?

sucks that u had to leave :S i met a few of the guys, was decent cruise but WAYYY too short, oh well. yeh, dunno how long you stayed aty first meet point but there was engiune revving there too haha, and there was only 3 meet points...lame ! didnt even use half a tank of petrol. my mate took lots of pics though, will get some of the decent ones up soon as i resize them.

yeh, it was crap how i had to leave, well it was good to have a chat to you jamie :)

slowpoke, i saw ya on the other side of the carpark and was gonna say hi a little later on but had to leave :)

as i was leaving i saw kylie and her stagea :)

it was a good turn out and a decent amount raised for adrian and family . it was good to see adrien actually on the cruise enjoying himself. my step kids had a ball taking bulk pics but i dont think many turned out too well

saw ya leaving sammy.. was gonna say hi until i noticed you were going. :)

saw R DIRTY 3 too.. but couldnt find the owner..

same with J TUNED..

people need tags on their shirts with their numberplate. :)

I was impressed with the turn out and the amount raised was something like $1300 so was not too bad.

Sam I saw you leaving... you need a booster seat :) :)

Parked next to Gazza and spotted slowpoke.

hehe i will say one thing, when i had my P's for the first few months i used to sit on a pillow under my seat cover lol :) but then i learned how to navigate were i was going without seein much lol

oh and mitchy, if you were the one in the white pants then yes i saw ya :P was gonna come over but had to go :(, i think you screamed out my name or sumthin :)

saw ya leaving sammy.. was gonna say hi until i noticed you were going. :sick:

saw R DIRTY 3 too.. but couldnt find the owner..

same with J TUNED..

people need tags on their shirts with their numberplate. :P

I was not at my car a great amount of time. I was with my mate (cruise virgin) with his RB25Silvia so spent most of time at meet points walking around looking/chatting.

Was a good quick cruise. Good to see the money raised. Enjoy your trip to America Adrian :mad:

Thanks to all the SAUWA people that turned up. was a great night. Sorry it was so short but that was due to the amount or cars we were expecting. we estimated that the regroup point were going to be quite long due to the amount of cars.

Adrian is off to the states in the start of December.

Thankyou all for your support.

Paul

Thanks to all the SAUWA people that turned up. was a great night. Sorry it was so short but that was due to the amount or cars we were expecting. we estimated that the regroup point were going to be quite long due to the amount of cars.

Adrian is off to the states in the start of December.

Thankyou all for your support.

Paul

Paul, thanx to SILWA for a well run cruise mystep kids had a great time running around with camera (pity the pics came out crap though).

Hope Adrian has a great trip

Killer cruise boyz, was bit short but :( Can't really have a controlled cruise with that many hoons :(

Think I was driving next to you along Thomas Road upto UWA to Canning Roundabout? I was the white dirty 32 with black rims that needs tune :) Guessing your [MY32GTR]...SEXY ride :)

Also seen SLOWPOK3 and heap of mates from the Silvia days who I still cruise with!

Killer cruise boyz, was bit short but :( Can't really have a controlled cruise with that many hoons :)

Think I was driving next to you along Thomas Road upto UWA to Canning Roundabout? I was the white dirty 32 with black rims that needs tune :) Guessing your [MY32GTR]...SEXY ride :(

Also seen SLOWPOK3 and heap of mates from the Silvia days who I still cruise with!

my number plate kinda does stand out heh? :(

Yeah all in all it was a respectable cruise.

I was bloody tired after the hill street meetup afterwards thou...Your car did rather well out there slowpoke felt sorry for that RX7 that seemed to have blown something after his heat with that WRX. how much boost was u running slowpoke?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...