Jump to content
SAU Community

Parts For Sale

Husky33
 Share

Recommended Posts

Husky33 Veteran

Husky33

Posted
Posted

Hey guys

Just clearing out some parts

Bosch 044- brand new, comes with brand new speedflow fittings $220

HKS adjustable actuator- used $100

GTR triple din gauge holder(still intact and working, was going to remove the gauges and install my own custom ones) $60

Postage can be arranged for all items but must be paid by the buyer.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/142480-parts-for-sale/
Share on other sites
Husky33 Veteran

Husky33

Posted
  • Author
Posted
out of curiosity, how much does the 044 flow??? does it flow more than a standard GTR pump?? also do i have to modify the brackets to fit a 044?? cheers

Std GTR pump is 190 litres per hour and supports 420 bhp

Bosch 044 pump is 330 litres per hour and supports 730 bhp

As you can see the 044 will support big power.

As it is an external pump you will have to modify the brackets(it is alot larger than stock). You will also have to purchase an attachment that has a filter sock on it if you want to install it intank(think you can get from bunnings). Any performance workshop should be able to fit it no worries. The speedflow fitting that come with it enable fuel hoses to be directly attached to both the inlet/exit of the fuel pump, most likely to be used if the pump were to be installed externally. There should be alot more info if you search on the forums

Cheers

Link to comment
https://www.sau.com.au/forums/topic/142480-parts-for-sale/#findComment-2653774
Share on other sites
Husky33 Veteran

Husky33

Posted
  • Author
Posted
I need another 440 so I'll grab it. Deca or next club meeting?

I had another guy of ns.com pm me saying he's interested, i'll find out if he's a timewaster shortly now doubt. You're next in line, i'll let you know asap.

Link to comment
https://www.sau.com.au/forums/topic/142480-parts-for-sale/#findComment-2656571
Share on other sites
Husky33 Veteran

Husky33

Posted
  • Author
Posted
GTR Guages still up for sale?

Im interested in them, also do you have any pictures of this?

Thanks

Still available, dont have a pic. Just looks like the stock triple din gauges in gtr's

Link to comment
https://www.sau.com.au/forums/topic/142480-parts-for-sale/#findComment-2656984
Share on other sites
GTRgeoff Grand Master

GTRgeoff

Posted
Posted
I had another guy of ns.com pm me saying he's interested, i'll find out if he's a timewaster shortly now doubt. You're next in line, i'll let you know asap.

Sounds fine. I'll get by. Just prefer to buy from the club members.....kinda keepin' the love happening. :(

Link to comment
https://www.sau.com.au/forums/topic/142480-parts-for-sale/#findComment-2657249
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      RB25DE NEO with Haltech ECU

      By Murray_Calavera · Posted

      You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • GTSBoy
      RB25DE NEO with Haltech ECU

      By GTSBoy · Posted

      Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      Could be correct. Meter might be that far out. Compare against a known 5 ohm 1% resistor.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap.  (edit: I went out and did it right now, the line I had chosen did appear to have no vacuum on it, it used to go to the front of the intake, I've now completely blocked that one off at the bracket that holds several vacuum lines by the firewall.  I T'd into the vacuum line that goes from that bracket to the vacuum pump at the front of the car, but no change in the MAP readings).  Using the new vacuum line that has obvious vacuum on the hose, im still only getting readings between -6.0 and -5.2.  I'm wondering why the ECU was detecting -5.3 when nothing was connected to the MAP nipple and ECU MAP selected as the source. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
×
×
  • Create New...