Jump to content
SAU Community

Recommended Posts

upgrade to a Z32 afm and get a tune to suit, it will be better in the long run as the rb20/25 afms are somewhat restrictive.

I have found Croydn Racing Developments (site sponsor) to be the best priced supplier for the Z32 AFM

hope that helps!

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2654235
Share on other sites

upgrade to a Z32 afm and get a tune to suit, it will be better in the long run as the rb20/25 afms are somewhat restrictive.

I have found Croydn Racing Developments (site sponsor) to be the best priced supplier for the Z32 AFM

hope that helps!

What he said

RellikZephyr

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2654337
Share on other sites

hey,

since these things go all the time on skylines i was wondering where the chepest place around BRIS to get these and is it worth getting on from the wreckers?

cheers

I have one for sale - $150 including postage to bris

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2654342
Share on other sites

thats a bit better than $$250 second hand that i just got quoted!, the hide of some people. so r32 and r33 afms are interchangable/the same? i got a mate with a 33 so if its the problem ill pm you 2rismo

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2654571
Share on other sites

He wants to replace the standard one Eddie :happy:

the cost of a new Z32 AFM is about $450 including plug might no be worth it dont forget the tuning/remaping price....

but from what i was informed the 32 is interchangeable 33.... dont quote me though....

but still 150 for AFM delivered is not bad....

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2654898
Share on other sites

is the Z32 AFM, fully compatible with the PowerFC?

do any of u have or use this setup?

yes, was looking into this option (have the Power FC already) but its not really worth it unless you want huge horse power or have 500+ dollars just lying around.......

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2657605
Share on other sites

is the Z32 AFM, fully compatible with the PowerFC?

do any of u have or use this setup?

I dont personally but am going to if funds permit.

The power-fc has a setting for the z32 and the q45 I think, please someone confirm?

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2658367
Share on other sites

yes, was looking into this option (have the Power FC already) but its not really worth it unless you want huge horse power or have 500+ dollars just lying around.......

about 200kw (depending on what mods of course) is where the standard afm runs out of resolution

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2658392
Share on other sites

Only series 1 AFM's are interchangeable with R32 RB20DET AFM's. The Series 2 has a 3 wire AFM with a pink label.

Don't forget that you can't just wire in a Z32 AFM and away you go. The ECU will have to be remapped...which is not possible on the R33 ECU. This means you will need to buy an aftermarket ECU like a PFC of something similar. You have to ask yourself what you want out of the car. Over 200rwkw? Then upgrade it.....if not then leave it.

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2660558
Share on other sites

Only series 1 AFM's are interchangeable with R32 RB20DET AFM's. The Series 2 has a 3 wire AFM with a pink label.

Don't forget that you can't just wire in a Z32 AFM and away you go. The ECU will have to be remapped...which is not possible on the R33 ECU. This means you will need to buy an aftermarket ECU like a PFC of something similar. You have to ask yourself what you want out of the car. Over 200rwkw? Then upgrade it.....if not then leave it.

Link to comment
https://www.sau.com.au/forums/topic/142541-afm-question/#findComment-2660561
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...