Jump to content
SAU Community

Recommended Posts

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

and what production years were Series 1 and Series 2?

I'm guessing;

1998-2000 Series I

1998-2002 Series II

yes/no?

Does anyone have Series II 2dr images?

Series 1 = 1998 - 2000

Series 2 = 2000 - 2002

My 34 is a 3/2000 and is a S1 so im guessing the SII came out from about june 2000 or so

the one on the right is not standard either, its got the nismo 300km/h speedo! and perhaps nismo centre gauges too although its blurry.

Thanks for all the info guys.. appreciate it.

Few years ago i brought a lemon s1 R33, had it for a year but it took me months to sell it, had too many problems. I was told the car had been in a major accident in japan (i was the first oz. owner) by a panel beater when i took the car in for a small spray job. Thank god, i got rid of the car for the same price i brought it..

With my next car, i will be doing my h/w and hopefully I'll come across a clean healthy black 34.

What was the production years for 34's? 1998 till 2000? Isn't that a bit short? So V35's begun in 2001 ?

Can some one tell me what on earth Xenon head lights are, lol i have no idea what they are or what they do.

Abo Bob

From the site you gave above.. what i've noticed is theres two different interior styles.. is the left one optional and the right standard?

R34GTTinfo_interior2.jpgR34GTTinfo_interior.jpg

Forged..

Thanks for the info :happy:

R34 GT-S, is this a series 1 or 2? .. such a beautiful colour though :) Its a pity this colour didn't come with GT-T's

Oh but it did.... in series 2 (I'm fairly sure)

I've seen the odd Bayside Blue series 1 but I've never been sure if they came with that colour from factory

Want to see hotness.... picture a midnight purple GT-t

Forged..

Thanks for the info :happy:

R34 GT-S, is this a series 1 or 2? .. such a beautiful colour though :) Its a pity this colour didn't come with GT-T's

mtrd_1.JPG

Judging from the pics, the front bar and steering wheel are definately S1. And yes, the GTT's did come in Bayside blue. One of the forum members has one.

My god.. that s2 bar does look shocking, you would expect the s2 bar to look better but a nice after market should fix all that up.

I'm hooked on this bayside blue color.. even if they did come with that colour from factory in s2 gt-t's id presume they still would be very rare to come by

Edited by pretender-
My god.. that s2 bar does look shocking, you would expect the s2 bar to look better but a nice after market should fix all that up.

I'm hooked on this bayside blue color.. even if they did come with that colour from factory in s2 gt-t's id presume they still would be very rare to come by

r34 gt-t's came in TV2 Bayside for both series I and II but only for series I's built in 2000 like mine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...