Jump to content
SAU Community

Finally Some Pics Of My Baby......


Recommended Posts

Very nice 33 mate mine is the same series 2 1997 model except in sonic silver. By the way the needle shouldnt be going all the way to +7 as that means its running about 1 bar or 14-15psi. 10psi is around the notch below it.

Cheers

Chris

Thanks Chris

Just love the look of the series 2

They look great in silver to..

Seen a few up this way.

I would really like to know how much boost I am running, but I swear that it flicks all the way to +7 at 5000rpm......

real nice ride man :( looks smick as. love the black, looks like new too. i really should do one of these for my car ;D

hey i notice u from cairns.. have u taken ur car up or down the range yet?. up towards atherton and that.. i lived up there for a while. that is one hell of a drive. would be an awsome rally track! but i doubt they would ever do that. as it would be too dangerous.

Edited by silverbulletR33
real nice ride man :thumbsup: looks smick as. love the black, looks like new too. i really should do one of these for my car ;D

hey i notice u from cairns.. have u taken ur car up or down the range yet?. up towards atherton and that.. i lived up there for a while. that is one hell of a drive. would be an awsome rally track! but i doubt they would ever do that. as it would be too dangerous.

Thanks mate :)

Love the range going up to Atherton, but my fave is probably the run up the back way from Mossman up to Mareeba....

Or the gillies hwy, as you said, One hell of a drive.......

Be great to get a group of skylines together for a run up through there

yeah, so many good drives up this way.

used to go up the kuranda range, down the rex range drive back to cairns along the coast, up the gillies and home down the kuranda.

takes in all three of the best drives up this way, you can usually do it in about a day if you stop and have lunch and whatnot.

the road up to copperlode dam is also a bit of fun if you can get a clear go. theres a good photo spot that looks out over cairns on the way up.

Nice car by the way, haven't seen you around yet....

Edited by Ol_Mate
yeah, so many good drives up this way.

used to go up the kuranda range, down the rex range drive back to cairns along the coast, up the gillies and home down the kuranda.

takes in all three of the best drives up this way, you can usually do it in about a day if you stop and have lunch and whatnot.

the road up to copperlode dam is also a bit of fun if you can get a clear go. theres a good photo spot that looks out over cairns on the way up.

Nice car by the way, haven't seen you around yet....

Thanks mate

Hope to see you around up here somewhere...

If you see me, stop and say g'day :sleep:

heh, i grew up in cairns (brinsmead actually, jsut around the corner from copperload)

used to ride up and down that on my bike

woudl love to take the line back home and drive some of those roads

quick tour up to port douglas, then up the back way to the tablelands would be an awesome drive, come home via the gillies

heh, i grew up in cairns (brinsmead actually, jsut around the corner from copperload)

used to ride up and down that on my bike

woudl love to take the line back home and drive some of those roads

quick tour up to port douglas, then up the back way to the tablelands would be an awesome drive, come home via the gillies

LOL

yeah..... actually planning that for this arvo if it stays clear....

One of my fave drives :sleep:

I ran a bar on a stock turbo for ages before i high flowed and then GT30'ed...

You can run a bar as long as it has been tuned rich. Rich tunes use alot of fuel and paint or rear bumper black, but they are a cooler tune they cause the exhaust temps to lower and therefore they help preserve the exhaust wheel's life...

I ran a bar on a stock turbo for ages before i high flowed and then GT30'ed...

You can run a bar as long as it has been tuned rich. Rich tunes use alot of fuel and paint or rear bumper black, but they are a cooler tune they cause the exhaust temps to lower and therefore they help preserve the exhaust wheel's life...

I have to get it serviced soon (as part of my 3 yr warrenty) and i will get all that sort of thing looked at then.

Thanks for the advice :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...