Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

if you look at it from the perspective of; if your fuel line leaks and you car blows it'll just kill you, but if people dont see you brakes for whatever reason your now indangering the lives of many people... so Holden win by virtue that their recall fault potentially kills less peoples than Honda's

if you look at it from the perspective of; if your fuel line leaks and you car blows it'll just kill you, but if people dont see you brakes for whatever reason your now indangering the lives of many people... so Holden win by virtue that their recall fault potentially kills less peoples than Honda's

just kills u i dont think so it could also kill anyone else in the car and buystanders

commodores suffered from inopperable tail lights for the last 12yrs so thats nothing new to them

the ve,s also have a problem with a knockin noise in the front of the vehicle when hitting bumps in the road which ends up being faulty engine mounts which have to be changed :)

If you think the Barina was bad have a look at the problems going on with toyota

Toyota models rank at bottom of crash-safety study

http://www.sltrib.com/business/ci_4699240

Toyota and its Lexus division accounted for nine of 16 vehicles with "acceptable," "marginal" or "poor" rear-impact protection, lowering their overall rating, the Insurance Institute for Highway Safety said today. Models included the Toyota Camry and the Lexus GS 350...................

A "poor" grade predicts serious or possibly fatal injuries in front-end and side collision tests performed at 40 miles an hour, while a "good" rating predicts a lower risk of serious injury, said Russ Rader, an institute spokesman.

Passengers in vehicles with "poor" rear-collision ratings are "much more likely" to sustain neck injuries compared with people riding in "good" vehicles, Rader said.

Edited by monaroCountry
just kills u i dont think so it could also kill anyone else in the car and buystanders

commodores suffered from inopperable tail lights for the last 12yrs so thats nothing new to them

the ve,s also have a problem with a knockin noise in the front of the vehicle when hitting bumps in the road which ends up being faulty engine mounts which have to be changed :)

dude... i was joking

Reality would suggest that one fault is equally as bad the other... with the killing people and all

As an industrial designer, I thought id add my 2cents. Its pretty much impossible to design a car that once put into production will come out being 100% perfect. As mentioned, pretty much every car has a niggle or too. So I think its very harsh to have a go at holden for having a few bugs. Belive it or not, most ‘new’ models are actually based on the model before that. They iron out the bugs from that model and do some updating, however once you start changing the chassis, some things that went right with the old model might not necessary be right with the new model, no matte how much money you spend and no matter how much testing you do, you cant beat a real world test and often problems come up after a few months of release. I think holden has done the right thing by not masking or trying to cover up anything and trying to fix things up asap. I’ll also add that I don’t work for holden or affiliated with holdens.

Another thing to note is that design wise, a lot of people say ‘oh it looks like a BA’ or “they should have been more creative’ you will find that as designers, most of us come up with some pretty radical concepts that the marketing/engineering/fincanance department then make us refine and cut back to something that’s more ‘acceptable’ If every single person who was looking to buy a commodore was a car enthusiast, then we could do some crazy designs that would really stand out, however the reality is most people who would buy a Commodore or a flacon is your everyday guy, family man etc. So the design cues have to be subtle as many people are fairly conservative. The commodore market would be the same as the falcon market so they have to be same yet different. and im sure holden and ford would be under strict guidelines to also have design cues from the past models, so there is only so much they can change. they cant design a completely different looking car becuase its way too much to risk. A new model can make or break a company (Ie Mitsubishi 380) and thousaounds of jobs etc, so they are forced to be concervative. Thats the reality of it all. How many of us complained that the upcomming GTR looks too different to the R34 model? One of my colleges who work for holden made the point that the rear light assembley on the HSV range (or possibly just the GTS) is different to your everyday commodore which hasn’t been done before. To change this one light assembely it takes a couple of million dollars cos that light assemlbely changes the panels that surround it and also will have to change the production line. These are the little things that people don’t always understand. And as with anything, it comes down to one thing and one thing only, money. One billion dollars is actually not that much for a car that holds a lot of the Australian market share.

Goin back to the 'looks', its pretty much hit or miss, becuase the general public will love or hate it before they even step inside one, let alone turn the key. When you invest so much money, you have to try and minimise risks and try and understand the market as much as possible and its going to be different from model to model. For example the AU falcon was based on the Ford Taurus (if you get a picture of the 2 cars you will see some very similiar design cues) because the Taurus was a big seller in the states. As ford found out, markets vary from country to country.

Performance and engineering wise, you can’t compare a HSV GTS to say a BMW M5, while they might seem similar on paper. Just like you cant compare a 911 turbo to a GTR. While its tempting to compare its completely different cars. You just have to appreciate them for what they are. I’ve never been lucky enough to drive a 911, but I’m guessing it would be a little bit more refined then a GTR, but having said that it also costs about 150K’s more. So for bang for your buck, id take the GTR anyday. It’s the same story with the Commodores, not every has a few spare 240k’s lyring around and if they can get similar performance and practicality (5 seats in this case) from a Australian made car for something that’s 1/3 of the price, then whats wrong with that? Even if there are a few recalls.

Edited by dineth

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...