Jump to content
SAU Community

Recommended Posts

Can't you do it yourself?

Its not really that hard to do, it was the first major thing I did to my car on my own. I don't mind coming and helping after exams either if you get stuck.

What FMIC have you got? just a china hybrid copy?

oh really, yeh i was thinking bout asking for help as i dont feel confident myself without instructions :yes:

id put in a carton of your choosing for the time :)

yeh its a hybrid copy, the seller assured me it fits good and other buyers rated it, but thats yet to be seen i guess.

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2663975
Share on other sites

My intercooler was a custom job that the previous owner gave me. It just hooked straight up to the stock piping so I didn't have to run a crossover pipe or anything. The crossover pipe isn't that much of an issue. IIRC the only things you need to do extra is chop the radiator fan a little so it clears the pipe and cut a hole for the piping. To do the hole you need a hole saw, the GTR and GTS-T chassis is the same so there a place all setup to cut.

The reo (front re-enforcement bar) and front bar need to be cut to fit the FMIC in there, its nothing too major that can't be solved with an angle grinder or jigsaw.

If you work fast you could get it done in under a day, mine took me a day and a half being my first time and all. If you do a search I'm fairly sure there are threads with pictures (might be for R33's but its virtually the same) for installs.

Give me 2 weeks and bottle of bourbon (not a beer person :yes:) and I'll come help you out.

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664049
Share on other sites

My intercooler was a custom job that the previous owner gave me. It just hooked straight up to the stock piping so I didn't have to run a crossover pipe or anything. The crossover pipe isn't that much of an issue. IIRC the only things you need to do extra is chop the radiator fan a little so it clears the pipe and cut a hole for the piping. To do the hole you need a hole saw, the GTR and GTS-T chassis is the same so there a place all setup to cut.

The reo (front re-enforcement bar) and front bar need to be cut to fit the FMIC in there, its nothing too major that can't be solved with an angle grinder or jigsaw.

If you work fast you could get it done in under a day, mine took me a day and a half being my first time and all. If you do a search I'm fairly sure there are threads with pictures (might be for R33's but its virtually the same) for installs.

Give me 2 weeks and bottle of bourbon (not a beer person :)) and I'll come help you out.

sounds liek a deal mate, ive got all the necessary tools !

wats ur poison ? cougar, jim beam ? :P

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664074
Share on other sites

sounds liek a deal mate, ive got all the necessary tools !

wats ur poison ? cougar, jim beam ? :)

buy him the sphincter of the universe its better :P

or try x speed top racing hyperdrive imports101 amongst a good many other places that can do it

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664100
Share on other sites

buy him the sphincter of the universe its better :P

or try x speed top racing hyperdrive imports101 amongst a good many other places that can do it

haha ill let him, decide :)

yeh i asked hyperdrive for a quote but they wont touch a copy cooler, fair enough i spose.

after that i asked extreem machines and they wanted about $400, other place said $380. I havnt shopped around a WHOLE lot, thought this would be quicker way to find out :)

thanks for reply though :)

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664144
Share on other sites

no a standard one

but they are good upgrades for rb20's

i was just making a point that the money you save from installing your fmic means you can buy other goodies.

yeh exactly ! :)

will go towards injectors or fuel pump...or AVCR...or power FC :S

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664395
Share on other sites

I can remap R32 ECU's aswell (useful arn't I? :P)

Go halves with tiesto in buying me a wideband and I'll do it for ya :)

haha whats a wideband, how much are they ? my guess is a lot ?

will need a remap at some point though

so might need your services :)

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664434
Share on other sites

haha ill let him, decide ;)

yeh i asked hyperdrive for a quote but they wont touch a copy cooler, fair enough i spose.

after that i asked extreem machines and they wanted about $400, other place said $380. I havnt shopped around a WHOLE lot, thought this would be quicker way to find out :P

thanks for reply though :)

Seriously, i would not use Extreme Machines. Not going into detail but if your going to use a workshop, find another one. Just my 2c

.

Also, isn't Paul at Autoworx in wangars supplying and fitting fmic for around $900 or $950?? Anyone had him fit one? Are the intercoolers any good?

Link to comment
https://www.sau.com.au/forums/topic/142965-fmic-fitting/#findComment-2664850
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...