Jump to content
SAU Community

Recommended Posts

well, i wouldve been rolling on work meisters if they werent lost on busfreight.

18 x 9.5 +24

18 x 10.5 +24

they are currently investigating their whereabouts ;)

what are you running now, last i heard you sold the effors to get something else?

Edited by A31cefiro

yeah efors are gone... as my navy blue track car is for sale

got a daily black sports touring factory 5spd rb20de... so far... ive done nardi, dildo knob, headunit, trust pod, bride zeta III, silkroad section rma8 coilovers, straight pipe rear section + ecv, guard flare, chrome grille, square headlights and late model tailights... my pink 5 stud/33 brake/kaaz 2 way/solid spacer cradle is out of the blue one going into the new black one next weekend aswell as my front s14 5 stud with 33 brakes...

also got my vented bonnet going on the new one...

sorting out wheel options atm

to use my bolton fender flares or not... thats the question... 500 to get them done like J's blue one from japan... or use stock guards - add bog and make some nice looking arches (not as good as the glass overfenders) for 800 bucks...

Edited by Hella Flush
  • 2 weeks later...

Stich Evolution 18x10 +8 Offset F 18x11 -1 offset R

8mm spacers on the front, helps clear calipers

Falken Azenis ST115 235 F 245 R

Bolt on flares smoothed over, front wheels inside the guards around 5-10mm... rears sit out around 10-15mm

Not alot of camber, prolly >2deg front and >1deg rear.... Lots of toe in on the rear though.

DSC01330.jpg

8J on the front with 235's and 25mm spacer

7.5J on the rear with 255's and 20mm spacer

still gotta roll fenders prolly gonna run 10J front and 9J rear in the future. with front over fender. not sure what im gonna use for the rear gaurds yet.

ahh sorry... i run it wider in the front for Touge (mountain roads)....

on the track i run it the other way... high speed drifts, or long eairly entry drags arent as common in the mountains..

i actually ruduce the stability of the car, in a sense, beacause it helps to swim through those tight mountain roads a little better.

Edited by 4DoorWhore
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • perhaps i should have mentioned, I plugged the unit in before i handed over to the electronics repair shop to see what damaged had been caused and the unit worked (ac controls, rear demister etc) bar the lights behind the lcd. i would assume that the diode was only to control lighting and didnt harm anything else i got the unit back from the electronics repair shop and all is well (to a point). The lights are back on and ac controls are working. im still paranoid as i beleive the repairer just put in any zener diode he could find and admitted asking chatgpt if its compatible   i do however have another issue... sometimes when i turn the ignition on, the climate control unit now goes through a diagnostics procedure which normally occurs when you disconnect and reconnect but this may be due to the below   to top everything off, and feel free to shoot me as im just about to do it myself anyway, while i was checking the newly repaired board by plugging in the climate control unit bare without the housing, i believe i may have shorted it on the headunit surround. Climate control unit still works but now the keyless entry doesnt work along with the dome light not turning on when you open the door. to add to this tricky situation, when you start the car and remove the key ( i have a turbo timer so car remains on) the keyless entry works. the dome light also works when you switch to the on position. fuses were checked and all ok ive deduced that the short somehow has messed with the smart entry control module as that is what controls the keyless entry and dome light on door opening   you guys wouldnt happen to have any experience with that topic lmao... im only laughing as its all i can do right now my self diagnosed adhd always gets me in a situation as i have no patience and want to get everything done in shortest amount of time as possible often ignoring crucial steps such as disconnecting battery when stuffing around with electronics or even placing a simple rag over the metallic headunit surround when placing a live pcb board on top of it   FML
    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
×
×
  • Create New...