Jump to content
SAU Community

Deca November 2006 - Convoy Cruise Saturday Morning


Recommended Posts

Hi All,

This is for all the people who are just going up to spectate/help out on Saturday.

If you are leaving on Saturday morning and competing you'll have to leave earlier to

make scruitineering, about 5:30ish I been told but that’s too early for us spectators :D

When are we leaving?

Saturday Morning - Depart approx 8am

Meeting point address:

Shell Roadhouse

Hume Hwy

Donnybrook VIC 3064

Melway 365 C5

Meet Time:

7.30am

Depart Time:

8:00am

Bring:

Adequate Fuel

CB Radio - Channel 14

Tour Leader:

The person who has been there before or knows the way :(

I am and everyone else I talked to who's going up Saturday is pretty flexible with times so if you wanna leave earlier (not too early) or later we probably can :cool:

its pretty easy, from that meet point drive on the hume

theres a turnoff for shepparton, take that left (the exit ramp is about 70k's odd from donnybrook)

then head to shepparton. note lots of speed cameras on the way

its about 1.5 hours from donnybrook to shepparton

once you are in shepparton

most of the guys hit maccas in the morning for breakfast

youll see the typical bunch of skylines, wrxs, evo's etc in the carpark.

if not, keep driving through shepparton, till you are almost at the end of it

the road is called wanganui rd, its a left, on its sign post is a blue "DECA" arrow signpost.

take that road for about 2 minutes, take the 2nd entrace (car entrace) and we are there in the car park

if you get lost 0404 TINT 99

My mum is bringing mini dezz up on saturday morning to watch and have some passenger runs (gotta try scare the shit out of my mum on the skid pan :laugh:) So I might tell her to meet up with you guys on saturday morning :D

its a convoy cruise to our motorokhana weekend in shepparton.

its just easier to go down there in a bunch of cars instead of driving up by yourself. you are welcome to come and specatate on the saturday if you wish

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...