Jump to content
SAU Community

Recommended Posts

' date='16 Nov 2006, 01:20 AM' post='2676125']

i MIGHT have my drift pig by then, if so i smash it in, even thou i will be total crap its good practise hehe :P

ps. maybe u can show he how to super drift 180 :sick:

ill show you how to super happy fun slide drift! come for a ride in the pig and ill show ya :mad:

  • 2 weeks later...
damn im racing the same day down the road lol at the go kart track ... i might try come up and watch inbetween my races

Dude! that tracks aiight but have you tried the karts they let you drive on Barbagello??

was an awesome event! pitty they advertised the wrong day on the radio :P but still a fairly big crowd.

results were:

Group A;

Borneo, DriftMike, Lance

Group B;

Jamie (red ceffy), Gav, Dan Le

Lance - Series Champ

DriftMike - 2nd

Borneo - 3rd

was an killer day with some of the best battles we had seen yet, everyone is improving 10 fold each time we hit the track! I got into div a and had a top 16 battle against punk and then a top8 battle against drift mike and bowed out gracefully! Thanks to all the supporters and sau guys that came along! Bring on 07' i say! :P

First drift comp that i have been to, lots of good driving and plenty of entertainment (the pink suzuki drift car),

cant wait for the National comp in feb.

Off topic, when i was driving up from the south, what was going on the mitchel, lots of police and people standing and looking over all the overpasses? A cruise of some sort?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...