Jump to content
SAU Community

Which Is The 3 Most Recommended Guages To Have On A Turbo Car

fishy

By fishy,
in Engines & Forced Induction

 Share

Recommended Posts

Andi Experienced

Andi

Posted
Posted (edited)

Maybe you guys are forgetting the fact that he said its a GTT. I hardly find the stock volt guage useful. Since the stock dash already has oil pressure I'd keep the oil temp guage in the stock cluster and change the boost guage to a better one and the volt gauge to water temp.

Edited by OnGsTa
shonen Grand Master

shonen

Posted
Posted

Im in the process of changing the guages as well..

Already got the defi boost guage on the a-pillar and will get Oil pressure, Oil temp and exhuast temp when the time comes..

was thinking of getting water temp but thats on pfc handcontroller so decided against it.

leb Community Regular

leb

Posted
Posted

vacuum/boost gauge - it shows if there are any "boost" leaks

a/f gauge - see whether your sensors are working properly and that your car is getting the optimal fuel to air ratio at various RPMS

oil pressure - only if you're doing serious work and have changed the oil pump or anything oil system related

oh oh dont forget. the MONSTER TACHO BRO! with a "hectic" shift light, you really need one of those because your car doesnt already come with a tacho standard or anything....

eMsta Grand Master

eMsta

Posted
Posted

wouldnt it be better to change the guages or add more relevant ones if the car has been modified heaps and is used for track days and that kinda shit?

The only use i see for these guages (if the car is not modified) is that they tend to raise the female curiosity (my friend regularly gets women looking at his wrx at night because of how the cabin is illuminated by the guages - but his car is modded heaps)

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
if you are tuning

exhaust temp

wideband af ratio

if you arent

stock boost is fine

stock oil is fine

maybe oil temperature

stock oil is not fine :thumbsup: its very common for the sender to f**k up in the r32/33 (not sure about r34); then you sometimes very values of almost zero and other times its fine :verymad:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...