Jump to content
SAU Community

Rb20det Turbo $150, Oil Line $30, Injectors $75

CEF11E
 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted (edited)

I have just done some upgrades and have the following for sale

1. RB20DET turbocharger 110,000 k's no shaft play good condition was running on my car with no problems. Comes with wastegate and elbow $150

2. Oil line to suit RB20/25 turbo. perfect if you need to mod your lines. $30 I know that's heaps but I will hold onto it as a spare if its not worth that to someone

3. Stock RB20DET injectors 110,000 k's they have been cleaned and serviced at some stage as they have new pintle caps on them, they are in really good condition. I will clean them ultrasonically free for the buyer $75

here are the pics of the turbo, injectors and oil line.

car007.jpg

car005.jpg

car004.jpg

car003.jpg

car002.jpg

car001.jpg

all parts can be shipped

Thanks!

Edited by CEF11E
CEF11E Veteran

CEF11E

Posted
  • Author
Posted (edited)
Hey im interested in the turbo and injectors, for my L24eT project!

Can you send me a few pics first?? im in Melbourne 3134, can you get postage estimate??

Regards,

Andrew :)

Hi Andrew, no probs will get some pics for you tonight. I will post them for you for free if you buy turbo + injectors. :D

Edited by CEF11E
CEF11E Veteran

CEF11E

Posted
  • Author
Posted (edited)

pics in first post of thread

comes with

Turbocharger

Wastegare Actuator

Turbo Elbow

Water line banjo bolts

Turbo elbow gasket

The oil line will bolt straight up to this turbo

The injectors are in excellent condition and were running perfectly on my car. I can also have them ultrasonic cleaned for free as I have an ultrasonic cleaner :) normally getting them cleaned cost $100.

take the lot for $250 delivered. :)

cheers!

Edited by CEF11E
Factory 5 Mentor

Factory 5

Posted
Posted

Great pics mate!

I just need to find out when and how much boost my L24 will get... it might be too small, but it looks to be in really good condition....

Does it have ball bearings?

And are there ways to modify it? (like differeent size compressor wheel???)

thanks,

Andrew

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

Cheers Andrew. It will provide enough flow for 160rwkw. and it will be ultra punchy. it is a ball bearing turbo and all parts are in excellent condition. you can run up to 14psi.

you could mod it but if 160 is not enough honestly you are better off going a bigger turbo to start with, but if you really wanted you can get the compressor cover bored out or get one from an rb25 turbo (direct fit) and put a larger comp wheel, rb25 or even to4E V trim. but you will be getting awful close to surge with this wheel :huh: but the bearings and shaft/wheel are in excellent condition and at $150 you can't loose :)

Cheers mate.

JVP Grand Master

JVP

Posted
Posted

Turbocharger

Wastegare Actuator

Turbo Elbow

Water line banjo bolts

Turbo elbow gasket

The oil line will bolt straight up to this turbo

The injectors are in excellent condition and were running perfectly on my car. I can also have them ultrasonic cleaned for free as I have an ultrasonic cleaner smile.gif normally getting them cleaned cost $100.

take the lot for $250 delivered. smile.gif

everything above still for sale?

cheers

jarryd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...