Jump to content
SAU Community

Recommended Posts

awe thanks steve lol.....i am trying to get a second hand one atm....if i cant get hold of one then i will borrow yours.....i would rather buy then borrow if you know what i mean :blush:

cheers man really appreciate your help

want to buy parts to finish my track car have cash to pay for them this weekend or happy to pay postage

r32 gts-t NON abs master cylinder

Profec B boost controler

s13 rear pods, factory lookn ones to just smooth the factory skirts out

550cc injectors for SR20 if u have 6 out of a rb25 for the rite price ill still buy em

r32/ s13 rear toe arms

r32 gtr or similar boot spoiler

thanks every1

-Adrian 04 253 13 447

hey guys

i need the pipe that goes from the return intercooler piping to somewhere.....its near the stock bov...mine has a mad split in it and its leaking boost....i have attached a pic to let you guys know what i am talking about....

and i need it asap

post-37912-1268349795_thumb.jpg

i believe i have 1 as well you can throw an offer and its your's...

wanted!!! can anyone replace my heater core for my 34 plz will pay

Sorry to tell you mate, but is in an ABSOLUTE PAIN IN THE A$$ of a job, as the WHOLE dash needs to come out. I can't even imagine what it would cost for a workshop to do it. The R33 one is MUCH easier, as about 1/3 of the dash needs to be removed to do it.

you sure they cant get into it by the glove box

i forget how much would have to look up an invoice but im thinking around the $200-$250 with supplying a 2nd hand core

and then that core broke and it was in again at there expense, Rocco and Rob are champs

Yes I am 100% positive Steve .... given I tried to do it. You can't even get close to the core getting out/in from behind the glove box. In fact even with the whole dash removed and the structural steel mounts loosened I still couldn't get the whole heater core with shroud etc out and had to break a bit of the plastic away to remove it and install the new core into the old shroud/mount/box.

But yeah, try Sinergy for a quote - maybe they know a secret way to do it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...