Jump to content
SAU Community

Recommended Posts

you're a fool

you're a fool also

i know you are but what am i

he made up a custom screamer pipe for my mate and it doesn't even scream because it appears the part that goes into the exhaust housing on the turbo is jamming the gate shut.

yeah thats awesome !

i know you are but what am i

he made up a custom screamer pipe for my mate and it doesn't even scream because it appears the part that goes into the exhaust housing on the turbo is jamming the gate shut.

yeah thats awesome !

that would mean that he would be over boosting something fierce and wouldnt have a turbo left or a motor.

its not over boosting.

well the gate wouldnt be stuck then. if the gate is stuck and not open the excess boost wouldnt be realeased and therefore create the over boost. obviously the gate it opening and operating as per usual. could he have a straight through exhaust as i cant hear my screamer over my zorst and the screamer dumps are not very loud. need external gate for that shit. or he has made a split dump and plumbed it back in so it like normal but better flowing

the screamer one. if it aint over boosting or its not makeing noise i dont understand.

it has to do either or ur turbo is f*kd and not spooling

the custom plumb back one wont scream as its plumbed back in.

LOL

if its an external screamer and it doesnt scream then there are two possible issues here

1. the gate isnt opening at all (car would be boost spiking

or

2. the car is so loud that you cant even hear if its venting externally.

the fact is. instead of bagging something on a forum. if there was a problem with the product then why dont you just take it up with andrew?

And if the dump was faulty Andrew would honour his product 100%

Think your mate borked the install

think your wrong. he is a mechanic.

LOL

if its an external screamer and it doesnt scream then there are two possible issues here

1. the gate isnt opening at all (car would be boost spiking

or

2. the car is so loud that you cant even hear if its venting externally.

the fact is. instead of bagging something on a forum. if there was a problem with the product then why dont you just take it up with andrew?

its internal gate.

ok sir.

Mitch, I have no idea wtf you are on about here :turned:

if its jammed the wastegate shut then it would be free boosting and popping your turbo, or better yet your mates bottom end? What your saying makes no sense......... must be a shit car lol

mechanics dont always know what they are doing.

i had to go fix a certain auto 33 as a certain large mechanial workshop with like 20 stores around adeliade never mind aust wide cause it kept cutting out.

simple determination was his t piece was crap and winding out spiking his boost and the ecu was shutting it down.

even tho the ecu that was being run was a power fc which was tuned in mt barker by reputable large mechanical workshop.

you only know what you deal with mechanic or not

and mitch out of all of this i am not bagging you but seriously i am so confused.

if not tell him to come past mine. i can find it easy as hell.

Edited by sneaky1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...