Jump to content
SAU Community

Recommended Posts

I was on the pushy and road past u a couple of times checking out the car. I was actually waiting at the intersection of anzacs and brighton when Niel put his lights on, went through a red light and chased u down. :(

serious? i didnt even do anything wrong though? i wasnt hooning or anything but by the sounds of it he must have had a hard on for me?? first defect in my life and owned sklylines for 7 years now :(

officer f**kwit Neil likes to pull over n defect Skylines for no reason, did me for same reason

and to think some of the Skyline community wanted to work out a peace offering with him a long time ago, what a joke

Happened to me on Saturday. Tried to do me for my stock bov, tried doing me for "drifting on full boost" with my daughter in the car (you think im that stupid), then reached down and pulled up a manual boost controller from under the turbo and major defected me for that and that alone. Even though i had am performance blast pipes and coil overs. Major hard on.

officer f**kwit Neil likes to pull over n defect Skylines for no reason, did me for same reason

and to think some of the Skyline community wanted to work out a peace offering with him a long time ago, what a joke

Frankly considering this blokes hit rate, I would be tempted to elevate a complaint to the police ethics board.

Once you get in front of an independant adjudicator and compare the ratios of his defections, and the defections on skylines in particular, i think then it would possibly show some statistical outliers which would have to be explained if the media were somehow incited to get involved (aka some indignant TT/ACA piece about road taxes and yet we still drive on shit roads)...

That aside, There's nothing wrong with law abiding citizens that love cars to approach the law and say 'we plan to do this, lets plan it so as few people are inconvenienced as possible'. The gesture is grand but sadly some station commanders enforce quotas and then there are also rogue police that have a bugbear and use every one of their legal rights to screw the enthusiast. There are many grey areas and you really cannot win... I've even had my sapol cousin in law say as much...

-D

-D

not wanted, its needed!!!

need R32 bonnet, bonnet latch and the upright and mount to the rad support, drivers head light and a Radiator,

need it all asap, have to fix my car by sunday

very desperate, and would prefer to help clear people sheds out instead of wreckers

Hi all

Looking for a few items for r33gtst 2door

Aftermarket front bar unpainted or preferably black good condition not hacked out

S1ors2 dash trim pieces in reasonable condition suit clean an spray

Aftermarket steering wheel boss kit suit non airbag hicas

Piggy back ecu + harness if needed to suit rb25det

3inch Hi flow cat suit r33

R33 aftermarket 3inch dump, front pipe

Nismo style r33 grill or black s2 grill

If you have any items i am interested in shoot through to me on

0413863525 or [email protected]

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...