Jump to content
SAU Community

Recommended Posts

I had this problem with my last 33 after instalinga gates timing belt. I took it to a reputable mechanic and they told me it was my ider bearing and tensioner bearing, they replaced them as well as my water pump. The noise was still there so I got over it and left it.

It was pretty frustrating though..

just got mine done recently...whines off its head...the mechh said..its good to have it tight as it will loosen up a bit after it wears in..

also showed me the old belt which came with the car...felt both belts...obviously the new one wasnt as stretchy compared to the used one..

like stated above...pump ya music up...if it doesnt go away after a month or so of driving..probably get it a tad loosened up..if u can be bothered

:)

yeh just did my belt( r33 gtr) used a gates racing and its noisy at idle but im not surprised,much stiffer than a standard belt. im a mechanic by trade and ive come across this before, itl' go away in 2/3000 ks (beds in i supose) if its a constant whining at all revs then its to tight.

good rule of thumb for tension is to be able to move the belt forward/backwards between the exhaust cam gear and ider about 5mm each way

Burkey

yeh just did my belt( r33 gtr) used a gates racing and its noisy at idle but im not surprised,much stiffer than a standard belt. im a mechanic by trade and ive come across this before, itl' go away in 2/3000 ks (beds in i supose) if its a constant whining at all revs then its to tight.

good rule of thumb for tension is to be able to move the belt forward/backwards between the exhaust cam gear and ider about 5mm each way

Burkey

i have read elsewhere you should be able to move the belt about 10mm not 5mm so what is it 10mm or 5mm when it is a new belt

well has anyone found the exact problem yet? or solved it?

im going to get an greddy clear top timing cover so i can take a look wen idling etc.

plus it will look sweet:)

and thats wen i'll take a look at the belt..

cant be bothered taking the cas and top cover yet..lol

ive doin just over a 1000k's since i've had the gen. nissan belt installed...

still got the sound wen at warm(normal operating temp)..

but my next question is...

has anyone had the same problem as me..left it alone...and the sound just stop/disappeared one day?????

like as the belt adjusted to the pre-set tensioner as like the old belt.....

bcoz i didnt have this sound before on my old belt...

anyone??????????????????????????????????????????????????????????????????

im going to replace all drive belts first...just to make sure there not the problem...

but still concerned about the sound im hearing wen engine reach normal temperature....

i have read elsewhere you should be able to move the belt about 10mm not 5mm so what is it 10mm or 5mm when it is a new belt

Using just the deflection of the belt is not how you measure the tension of a belt. For example one person may use 10kg of force and another use 5kg of force. Tension is measured using a force and deflection. The manuals etc do not give a tension for the timing belt. It relies on the spring behing the tensioner pulley to apply the correct tension. Synchronous belts do stretch but not very much over their life.

To check if it is the belt making the noise you can try the following. Remove the alternator belt and run the engine, if noise is still there remove the p/s belt and run the engine. You can also remove the top timing belt cover and replace the CAS using some washer to space it out (approx thickness of the cover). Taking extreme care not to drop anything into the timing belt area, run the engine.

well has anyone found the exact problem yet? or solved it?

im going to get an greddy clear top timing cover so i can take a look wen idling etc.

plus it will look sweet:)

and thats wen i'll take a look at the belt..

cant be bothered taking the cas and top cover yet..lol

ive doin just over a 1000k's since i've had the gen. nissan belt installed...

still got the sound wen at warm(normal operating temp)..

but my next question is...

has anyone had the same problem as me..left it alone...and the sound just stop/disappeared one day?????

like as the belt adjusted to the pre-set tensioner as like the old belt.....

bcoz i didnt have this sound before on my old belt...

anyone??????????????????????????????????????????????????????????????????

im going to replace all drive belts first...just to make sure there not the problem...

but still concerned about the sound im hearing wen engine reach normal temperature....

i would say you timing belt is to tight like mine. im using a gates belt, alot of people say it is normal for a gates belt to make a noise. i have been told that is wrong and belt is to tight which can cause tensionr bolt to break then your motor is stuffed i have read someone say turn your music up i dont think thats the best advice

Did the person that did your timing belt know what he was doing?? If your timing belt was to snap, or something similar, there goes your engine... For some things its better to pay a bit more and know you getting someone that knows what they are doing....

When i did mine... two months or so ago, i got XSPEED to do mine, even though i know they will charge me a bit more then i could of got if i look for a cheapest place... but it gave me piece of mind that they know what they are doing, since all they do is pretty much work on skylines.

Maybe bring it back to the guy and ask him to check it out?

yeah, mine was doin by a mate who works at nissan...

but yeah, alot of people seem to have a similar problem after changing ther -belt...

and wer not talking about gates belts!!!!everybody knows they make sounds..lol

  • 4 weeks later...

i have a gates racing timing belt myself and have this whirring/whining sound. it's not loud like some have described, but if you're outside the car near the engine you can hear it a little bit. 3 mechanics told me that gates timing belts are noisy naturally but as the belt stretches the sound will go away. doesn't seem like a problem to me!

its weird..my sound is GONE!!!!!!!!!!

?????

lol

i just did 102k's on my clock..

and my new gen. nissan was replaced at 99k's

so it must expand after a while...........or somethin along those lines....

i had i look at a mates timing belt on his skyline (took the top timing belt cover off).. his belt was tighter then mine his dont make a noise but mine does so im hoping my noise will go away soon like you bumble bee as my belt has much more play yet makes a noise strange so i guesss in other post when i said your belt was to tight like mine i was wrong

  • 7 months later...

well...its bein ova a year...and ive done about 114,000ks now..

and ive got a weird whinning sound again..lol

at first i tht it was my turbo...coz it was making it during acceleraion and wen back off the throttle..

u can hear it whining down...

i was like crap!!

anyways..so i took my old turbo off...notice i had had about 2mm shaft-play and wen spining my compressor wheel..i could hear some bearing sound...

so i got a second hand series1 turbo,,

looked good with about 1mm shaft play and no bearing noise/sound...

so i fitted this to car..no leaks or anything..

anyways..the first time i went to start my car..i could still hear the whining sound wen accelerating and wen backing off u can here it whining down...

so now my think it could be a pulley..like an idler pulley...??

coz i didnt change them wen getting my timing belt...

oil pressure and water temp looks fine...but im reading the stock gauges....and there not that accurate...

so i dont think its the oil pump or water pump..

but wat are their signs of failure???

im taking off my top timing cover today...

so i should know soon if it is and idler pulley..

anyone had a similar problem to this??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...