Jump to content
SAU Community

Recommended Posts

Hi everyone.

Well, I went on the hunt for royal purple engine oil and tranny fluid. I went to various places and they either had to import from the US taking a month or more, and only did it by the quart, or they would not order it in at all.

In the end, I decided to drop a line to royal purple Australia and ask. I talked with a good bloke and he said because they didn't have many distributors in Melbourne, they'd sell to me direct. I bought some and am off and running.

They also said they'd look after us if I wanted to organise a group buy, so here I go.

The price they gave me was 5ltr 10W40 $82.50

75W90 1 Quart $28.70 x 3

Total including freight $180.60

5 litres is about 5.5 quarts, the best I've heard of was for about $17.50 a quart, this works out to be about $15 a quart.

If we get enough interest, I'm sure they can do better, but it's kind of a balancing act.

I need to know if you guys are interested. The more interest, the better deal we get, the better deal we get, the more interest.

Drop a line here if you want to get some. If you have any queries, let me know on this topic so I can answer it here for everyone.

Anyone that does not know about royal purple, feel free to check out www.royalpurple.com.au or www.royalpurple.com for the US site. From a lot of opinions, it's a competitor redline in terms of performance, but a bit cheaper. As my car is not hard tuned, I can definately justify getting great fluids for my vehicle, but redline is a bit pricey for me.

Anyone else who has used Royal Purple, feel free to endorse or discuss here.

I'll see how many are interested and we'll go from there.

PS: http://www.skylinesaustralia.com/forums/in...showtopic=22458 is the ongoing discussion about 'the good on oils' RP gets a bit of endorsement there.

Link to comment
https://www.sau.com.au/forums/topic/144364-eoi-royal-purple-oil-products/
Share on other sites

no interest?

Oh well.

I should mention that street commodores did a test that measures film strength and metal on metal protection, and Royal Purple came out on top, beating Redline, Penzoil, motul and many other top name brands.

The test involved having a rotating disc dipped in an oil well making contact with a non lubricated cylinder (meeting point perpendicular to rotation of cylinder, meaning lotsa friction. They then put weights on the arm holding the cylinder to increase load.

The only oil to come near royal purple was a penzoil one. Can't remember which. It took a full 3 pound load before a scar on the bearing could be seen.

Royal purple took 3 pounds and no scar until they took the oil well away, and even then the scar was miniscule.

I've got the oil in my engine and have noted a slight drop in oil pressure (went from 7.5W-30 to 10W40 though) a much easier cold start, quieter idling and a better ride, although I admit I did an ECU reset when I did the oil change, so that would have had an impact too.

I would be keen for some diff/transfer case/gearbox fluid.

I have a 1990 R32 GTR.

I will just have to find out how many litres it takes etc.

Keep me updated tho!!

Cheers,

Dan :happy:

yeh me 2.drop me a pm when ya no

cheers

no interest?

Oh well.

I should mention that street commodores did a test that measures film strength and metal on metal protection, and Royal Purple came out on top, beating Redline, Penzoil, motul and many other top name brands.

The test involved having a rotating disc dipped in an oil well making contact with a non lubricated cylinder (meeting point perpendicular to rotation of cylinder, meaning lotsa friction. They then put weights on the arm holding the cylinder to increase load.

The only oil to come near royal purple was a penzoil one. Can't remember which. It took a full 3 pound load before a scar on the bearing could be seen.

Royal purple took 3 pounds and no scar until they took the oil well away, and even then the scar was miniscule.

I've got the oil in my engine and have noted a slight drop in oil pressure (went from 7.5W-30 to 10W40 though) a much easier cold start, quieter idling and a better ride, although I admit I did an ECU reset when I did the oil change, so that would have had an impact too.

film strength is only one of the key compoents in a a good oil. I have seen many UOAs on RP and Redline cars and seen better results overall with Redline. Although I believe RP is good, some love it and some hate it.

just have a look on the Oil thread in general, will be some more info. Its by no means conclusive based on a subjective test as stated.

film strength is only one of the key compoents in a a good oil. I have seen many UOAs on RP and Redline cars and seen better results overall with Redline. Although I believe RP is good, some love it and some hate it.

just have a look on the Oil thread in general, will be some more info. Its by no means conclusive based on a subjective test as stated.

No argument here, Redline is definately a great oil, but it is by no means a perfect one. I couldn't justify the extra $ for little to no benifit on my car. But hey, that's my choice. I'm just extending that choice to others.

I beleive the GTR takes 4.8 litres of oil.

No argument here, Redline is definately a great oil, but it is by no means a perfect one. I couldn't justify the extra $ for little to no benifit on my car. But hey, that's my choice. I'm just extending that choice to others.

I beleive the GTR takes 4.8 litres of oil.

fair enough...just clearing the air for people to make up their own mind. your price is cheep tho.

  • 6 months later...
no interest?

Oh well.

I should mention that street commodores did a test that measures film strength and metal on metal protection, and Royal Purple came out on top, beating Redline, Penzoil, motul and many other top name brands.

The test involved having a rotating disc dipped in an oil well making contact with a non lubricated cylinder (meeting point perpendicular to rotation of cylinder, meaning lotsa friction. They then put weights on the arm holding the cylinder to increase load.

The only oil to come near royal purple was a penzoil one. Can't remember which. It took a full 3 pound load before a scar on the bearing could be seen.

Royal purple took 3 pounds and no scar until they took the oil well away, and even then the scar was miniscule.

I've got the oil in my engine and have noted a slight drop in oil pressure (went from 7.5W-30 to 10W40 though) a much easier cold start, quieter idling and a better ride, although I admit I did an ECU reset when I did the oil change, so that would have had an impact too.

haha a totally irrelevant test.... they used a grease tester....... anyone can add additives to pass that test but it does not replicate any condition found inside a combustion engine.

edit: oops old post :woot:

Edited by URAS

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...