Jump to content
SAU Community

Recommended Posts

OK on the weekend of the 15th, 16th and 17th I am going to be in ipswich ripping apart my dash and replacing my heater core, those who are in the general area and want to stop by to help out or laugh or bring beer and laugh, please PM me and once i know where it actually is where we are going I'll let you know :laugh:

So far darrin has said he'd pitch in, and it will just be me and a mate, so any help will be greatly appreciated.

Brad, you mentioned some wierd, hard to get to screws, I cant seem to see any on the FAST pics I got below. I went through each FAST pic for the WGNC34 model and came up with these, am I missing anything?

dash1.jpg

dash2.jpg

dash3-heatercore.jpg

dash4.jpg

dash5.jpg

dash6.jpg

dash7.jpg

OK so I will be at a workshop, so tools wont be a problem, but what other things should i have onhand, for obvious example, replacement coolant?

ANyone got any tips or tricks or any hints or secrets?

I know this is going to be a BIG involved job, so any help anyone could give would be great.

Thanks in advance,

Cy

Link to comment
https://www.sau.com.au/forums/topic/145059-replacing-heater-core/
Share on other sites

Looks like a pretty similar job to the one I had to do on my R33

Will have to remove the steering wheel aswell to get the dash out. Will need a T50 tool to remove airbag from steering wheel, I have one if needed.

Will need to remove passenger airbag aswell

There is always some hidden bolts in behind vents etc.

Most modern cars are built all very similar.

Should be about a 4-5 hour job all up and a few beers :D

You reckon? Well I plan to arrive friday arvo/evening and make a start either friday night or saturday morning. It would be great if we got it all done in one day :D Because then we could have a go at rewiring my reverse light :P

Bugger. Ska I was hoping to meet you when you came down. I'm in for the chop on the 11th and wont bw out till 15th but figure i'll be a bit sick and sore. Hop it all goes well.

Dude, this took me about an hour and half just to remove and heaps of the dash and associated bits were already gone.

My suggestion is to take out the air con unit (this means a regas afterwards) and get at it from the side.

Snap the two plastic bits that hold it in and pull it out sideways. It should hold in place without them on installation.

I removed about 50 nuts and screws etc to get the bars out that cross under the dash. I got about 4cm movement but couldn't get them out.

Good luck.

  • 3 weeks later...

OK it's done, here is a few observations:

1. DONT EVER DO THIS IS FCUKING SUCKS DOGS BALLS!!!

2. Did I mention is freakin sucked?

3. It really sucked!

4. Everything that possibly could go wrong did.

5. Without the help and support of a lot of REALLY FCUKIN FANTASTIC people, I would not be here today.

Stan, yours fit beautifully, we have heat and aircon :D So nerr nerr to your having to regass the aircon :D:)

Other then that over the past 2-3 weeks I have had the privalege to have the help of some VERY VERY nice people:

Marc - Revhead - Without his help and use of a workshop i would never have been able to get this done, Marc and his whole family are wonderful people, even if his brother covered the rear passengers side of the car with bright green 2pac by accident :laugh:

Darrin- darrinspencer - Advise and rear camber bushes, which we ran out of time to put in.... stupid freakin heater core.......

Rob - qickstagea - Thanks heaps for your help installing the speakers, mate they rock! Maybe next time I'll remind you to turn your car off, :O 3hours worth of idling, man I have never heard of anyone forgetting to turn thier car off.... whoops :D

And to everyone else out there who has sent me their condolances, it really makes me proud to be a part of this wonderful bunch of people in the stagea section, and SAu.

I am going to go back to sleep now, ~19hours is just not enough after that freakin stressfull 4days :D

Yeah here is the diy:

1. spend 2 days unbolting and removing stuff

2. spend another 2 days trying to make it all fit back in...........

Yeah didnt really need it for the heat, just wanted to get it done so that it is one less thing for potential buyers to pick out.

On the upside I did fine out I have platinum spark plugs and the results of my compression test:

1 - 138

2 - 148

3 - 137

4 - 138

5 - 136

6 - 138

So all up not bad, I did the test about 5 times just to make sure i was right with number 2, but it always hit 148 for some reason, still nice to see the engine is nice and healthy :P

  • 8 months later...

OK

so my heater core has gone walkabouts

what model / part numbers need to be used to repalce it - ie what heater core from the 'skyline' family fits ?

otherwise its around $500 to purchase the stagea item from japan.

I bought this one (300zx) from here when i replaced my R33 core, just changed the hose connections over. FAST says that the Stagea core is same as the R33 core, 27140-0E010, the core seems to be universal on a few models, compare the picture with yours.

http://www.ttzed.com/products/products_det...=&do=detail

Why the F%#@ didnt Nissan make the core more accessible, instead of having to dismantle half the car, they usually go around the 8 yr mark, looking forward to killing 3 days of my life soon.

Edited by chook
OK

so my heater core has gone walkabouts

what model / part numbers need to be used to repalce it - ie what heater core from the 'skyline' family fits ?

otherwise its around $500 to purchase the stagea item from japan.

my R33 core just packed it in too. the 300zx core is a match as stated and it will be a whore of a job. lucky summer is coming and we get a few months to deliberate.

wanna fly over to sydney and help?

lol I'll hold your beer

hahahaha

me no kneel

as from tomorrow 7am (13/9) wont have any kneecaps =(

for me, the tune shop will be doing the work =(

................. next winter

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...