Jump to content
SAU Community

Recommended Posts

Do you find it annoying to constantly turn your TCS off?

Do you wish it defaulted to 'TCS Off' the second you started your car?

If you answered yes to either of those questions, this is for you!!!!!

The device when fitted to your car will instantly turn off the traction control, you now have to press the button to turn it on! (reverses the factory setup) The circuit can also be wired so that it's selectively on (great if your girlfriend is going to drive the car and you want TCS to come on the second she turns the key!!!!!!)

Easy to wire with only 3 wires to the ECU in the boot:

Only $30 + Postage

TCS-Stopper.jpg

Actual unit may vary slightly from picture, new improved wiring version only has 3 wires!!!

Not that im that lazy,, im not to bothered presing the button, but, if it automatically turns off, does this mean the ""TSC OFF"" dash light is always on????

And isnt it just as easy to remove the fuse :)

Awesome work on finding it though

Yes 'TCS Off' is the default.

It's not as simple as removing a fuse, I wouldn't recommend taking a fuse out, this actually buggers up a few of the other systems that rely on the TCS and will give the SLIP light as well as the car detects an error. You also can't turn it on if you decide you want to, you'd have to mess around replacing a fuse.

The other benefit is the switch still works, just in reverse...you press to turn on. This circuit just reverses the operation of the switch

It took me a while to build these a fair bit of trial and error :)

Yeah its a pain in the ass turning tcs off, or sometimes i forget and try to light the wheels and it stalls :) were bouts you located? i'll take one...

Yeah its a pain in the ass turning tcs off, or sometimes i forget and try to light the wheels and it stalls :) were bouts you located? i'll take one...

Exactly what I mean!!!! I find I get owned on corners where the car *thinks* it would be a good idea to drop engine power.

I'm located in Brisbane, PM your details and I'll get one on it's way.

Wiring is fairly simple, much like an SAFC or similar, except it's only 3 wires to the ECU in the boot, the unit mounts behind the panel alongside the HICAS computer.

Only $30 will prevent you from forgetting to press your TCS button and looking like a chump as you get flogged by a barina and your car is still thinking about giving 3 cylinders back to you.

Not with anything over stock power, slows you down by kicking in all the time. It sucks!!!

Or if you have a valve body upgrade :laugh:

Only $30 will prevent you from forgetting to press your TCS button and looking like a chump as you get flogged by a barina and your car is still thinking about giving 3 cylinders back to you.

I bet I'll still be beaten by a Barina

Also Dan, missed your MSN message the other night - I'll take you up on your offer :rofl: Cheers!

Installation will happen tonight - will post up results tomorrow morning! Now it's just a matter of turn the key then slide; instead of turn the key flip switches like you're in a fighter plane then slide :)

On the topic of the ABS though; what happens if your car does not have ABS or it was removed?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...