Jump to content
SAU Community

Recommended Posts

Hey Dan,

Great little unit! Thanks for all the assistance you provided me when I had problems with the install.

Yoi helped out whever I had a questions.

Great product!

Kev

Here's a challenge....

And a question....

And a statement....

No particular order ;)

Firstly.... Is the second throttle body a simple on/off thing or is it variable allowing a 0 - 100% position?

Secondly, if the throttle body is a variable douvalacky, you could adjust the voltage going to it to allow a series of different throttle positions.

Thirdly, could you bend the signal that goes to that throttle body to allow a 'slowing' of the power delivery more so than a 'forehead meets steering wheel' stopping of power delivery.....

6-10% slip is the best for traction.........

Motec can do it.......

Yes it is variable, yes it can be fed a progressive voltage...but the killer is the fact the car shuts down 3 injectors. You'd need a way of preventing the car from doing this, it'd be a pain to get around as you'd need to disable whatever drops the voltage going to the inejctors...I think it's in the programming wizardry :S

So what you are telling me is that yes, you can do it.......

YAY!

*Waits Patiently for 666DAN to come up with something.....*

Reckon you could make it cut spark instead?

*Waits Patiently for 666DAN to come up with something.....*

You'll be waiting a while :) I think you're the only person who would be keen for it :D

hi guys. ive just upgraded to an r34 gtt from an r33 gts t, now lets talk serious stuff.. why is the traction control so strong on this model, i had my r33 going sideways without any issues and still had traction control working ?? i tried to throw the 34 into a corner ysterday and it droped power displaying SLIp????

Bloody hell Dan, I just bought new globes for my dash then I see you sig. lol. SO hard to find the right globes for the 34's!

haha Adz, they're not hard to find - you should have just asked me - I've had blue hi-intensity LED's in my dash for 2 years :ninja:

Had enough of the blue now... time to put a new Nismo 320km/h dash in :rofl:

  • 2 weeks later...

hey i have a problem my tcs off, slip and engine light are always on.But i know that my tcs is on.Can this device

help me anyway?Due the fact that the tcs off light is on i cant turn the tcs off.Any help!

hey i have a problem my tcs off, slip and engine light are always on.But i know that my tcs is on.Can this device

help me anyway?Due the fact that the tcs off light is on i cant turn the tcs off.Any help!

You may need to check your error codes and see what the issue is, so you're saying the TCS is still working even though it says Off????

This unit won't be able to help you as it relies on a functioning TCS and ABS system.

  • 2 weeks later...

my stagea has a similar problem but without the engine light, just the TCS off and slip light come on when the car is turned on sometimes, it's done it maybe 15 times in 12 months,

it goes away if the car is turned off then back on.

im not worried

yep I would be keen for one of these as well .... would be significantly better if we could 'program' how much slip the TCS allows - like Bass said you actually only need around 10% - whereas I would think the oem TCS is around 50% when activated.

Also, another challenge for you - can you make up a similar module to the TCS thingo that makes the steering wheel gear controls 'On' by default when you start up, rather than off? I have no idea why they even invented such a switch - why the hell would you ever want it off? Even if you don't use the steering wheel controls then it still wouldn't hurt to have it come on every time you whack the gearknob into tiptronic mode. I assume you could do it by relay off of one of the wires to the switch in the centre console?

yep I would be keen for one of these as well .... would be significantly better if we could 'program' how much slip the TCS allows - like Bass said you actually only need around 10% - whereas I would think the oem TCS is around 50% when activated.

Also, another challenge for you - can you make up a similar module to the TCS thingo that makes the steering wheel gear controls 'On' by default when you start up, rather than off? I have no idea why they even invented such a switch - why the hell would you ever want it off? Even if you don't use the steering wheel controls then it still wouldn't hurt to have it come on every time you whack the gearknob into tiptronic mode. I assume you could do it by relay off of one of the wires to the switch in the centre console?

I did look at the unit for the Steering wheel, I got stumped by it using some bizzare logic to trigger, may need some time back at the ol' drawing board :laugh:

Hey, i just bought a R34 and the switch TCS switch does not turn off the TCS, do you have any idea why this is the case, it acts like a push button rather than a actual switch is this correct? i tried taking out the fuse and it worked but i was reading the forums and i think someone said it can stuff around with other systems, so i have put the fuse back in for the time being. Can you get back to me and let me know whats the go. Also do R34's come with a radio, i assumed they did but when i recieved the car and tried to tune in a radio station i could not get a signal, i previously had a 33 and there was an aerial but none on the 34, any ideas?

Thx

I got mine on Friday. Simple and quickly installed.

Works a treat. Start the car and BAM! TCS is off. No more fiddling for the switch as you approach interesting corners bends or taking off at the lights. I can finally sleep better knowing that the car isnt going to want to go limp on impulse.

:)

if only u could stop other things from going limp on impulse.....

oh yeah bump + 1 sold if u get it to do ignition cut instead of fuel cut!

  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...