Jump to content
SAU Community

Recommended Posts

we have a fully prepped race crank (RB26) on offer...

sonic tested, cryogenic treated, cross drilled, grub screwed, JUN oil collar fitted (new), ground and balanced.

this is all ready to be fitted.

all work professionally carried out by Croydon Racing Developments and is available to be picked up from their workshop at Silverwater in Sydney.

$650...no offers please

Link to comment
https://www.sau.com.au/forums/topic/145831-r33-gtr-fully-prepped-race-crank/
Share on other sites

sorry not after a crank by why dose a R33 Crank need a JUN collar.

because when the oil pump disintergrated it rounded off the flats and marked it up a bit....the collar is stronger due to its superior mettalurgy. Id collar any high rpm crank with this item R33 or not...perfect match for the JUN pump as well

is this to suit standard size? i'm very interested because my crank needs to be repaired as part of the rebuild, it might be better off to buy yours!

its 10 thou- on the big ends and mains...if your crank needs to be ground, balanced, crack tested and a collar fitted it would be the same cost as buying this one....essentially this crank is free....its the preparation your paying for.

done. i'll take it then. PM me details please.

postage to adelaide?

Croydon's banking details and pick up address for your courier can be found here....

http://www.skylinesaustralia.com/forums/in...howtopic=145354

If you cannot arrange freight Lance can arrange courier for you at your cost...phone him on 02 96484264

pm me when you have deposited so i can let other buyers know its sold.

Thanks for clearing that up for me paul

I probably should have mentioned why the collar was fitted in the 1st post as i thought the question might be asked.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...