Jump to content
SAU Community

Recommended Posts

Hey guys. I went to Morapowa today and got my car dynoed. I managed 161.6 kws atw which im very happy about. Mods are a full exhaust and very dirty airfilter. My AFRS are really good and i was running only 8psi when i made max power.

All in all im very happy, and the dyno i ran the car on was recalibrated last week by DD, so its pretty close to 100% accuracy.

Thanks goes out to The guys at Morapowa, namely Martin Donnan.

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/
Share on other sites

Hi EnricoPalazzo, did Martin give you any clues as to the reason for the dip in the power at 160 to 165 kph? Having seen a number of similar charts thus is a common issue. As usual, it doesn't show up as an air fuel ratio problem. It has intrigued me for quite a while now and I was wondering whether Martin had encountered it as well.

Thanks for the post.

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-295811
Share on other sites

Nah he never told me about that dip, althou it seems common on all skylines. Im pretty happy with the result, as it is only a benchmark for me, and it will in the end give me a good comparison of what power i have made with the future mods that i am gonna do. Lets hope i can crack 200 rwks even thou some people think its not possible.

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-297700
Share on other sites

Originally posted by hippy

let me know what u do :)

At the moment I've dyno'd my car at 203rwkw with basic mods:

1995 S1

70,500km

Stock ECU

Stock Turbo

FMIC

HKS Pod Filter

2 Stage boost controller

Full 3" Exhaust with 3" Cat

7psi = 186rwkw

12psi = 203rwkw (leaning out at the top)

I was quite suprised by these results because similar model cars with similar mods (some even with PoweFC's) were still doing around the 170-190 power mark on that day.

http://skylines.pnc.com.au/dyno-203rwkw.jpg

From here I plan on installing a Malpassi Fuel Regulator (have it already just a matter of fitting/tuning it) and then an Exhaust Cam Gear.

Im hoping this will get me up to around 210rwkw figure.

From their its onto a PowerFC and thats about it for power mods, the rest will be seats, bodykit, wheels and im done (so I hope).

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-297721
Share on other sites

After reading Rev210's posts, i think i will get a lightened flywheel before an I/C. I think ill hit 170-180 with boost set to 11-12psi and with thermal wrapped intake pipe and front pipe. CAI and partition, cleaned airfilter, service, "Hi-flow" cat, removed rear mesh from maf, and more timing during dynoing.

My AFRs are really good for a stock ecu. At 11.5 at max power 162kws and only 8 psi, i feel im gonna make a bit of power.

And to repeat, the Morpowa Dyno was only calibrated a week ago, so the result is very accurate.

Does anyone know much about water injection or water spray kits?

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-297763
Share on other sites

Matt - hate to tell you mate, but even with my car's power it still feels slow... :uh-huh:

It only ever feels fast for a week or two... Then you feel like you've lost power... But if you run it on a dyno - same power! :burnout:

BTW - Why's everyone running in shootout mode these days?

matt

Originally posted by whatsisname

I know what you mean about it feeling slow, mine feels slow too. You get use to the power & it starts to feel slow :D

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-299574
Share on other sites

We spend all this money & the fun only really lasts a wk or 2 ;)

Originally posted by matlowth

Matt - hate to tell you mate, but even with my car's power it still feels slow... :uh-huh:

It only ever feels fast for a week or two... Then you feel like you've lost power... But if you run it on a dyno - same power! :burnout:

matt

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-301222
Share on other sites

Is it true that you actaully get a better power output ( Figure ) in shootout mode?

I managed to get 125rwkw in my r32 with the same sorta basic mods and 20 deg advanced timing on 10psi. I was under the impression that the r33's and 32's have a 20 odd kw difference in stock form?

btw. Nice work enrico ;)

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-301683
Share on other sites

I have been told that Shootout mode gives higher readings thats why i asked him not to do it in that mode, but the guy told me that Shootout mode is accurate and takes into account different variables (air temp, humidity etc etc) which the normal mode does not.

So from what i gather, No it doesnt giver higher readings, but im sure it will be argued that it does.

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-301782
Share on other sites

From all the dyno readings I've seen, it gives an extra 10%.

One car made 226rwkw at a dyno in shootout mode, and then the same day, made 206rwkw at Frankston tafe in the normal mode...

A Supercharged V8 Clubby which made 312rwkw in shootout mode in adelaide made 280rwkw on this dyno.

Normal mode does take air temps into consideration, and compensates, that's why you don't stick the temp sensor inside the engine bay...

Link to comment
https://www.sau.com.au/forums/topic/14597-r33-dyno-results/#findComment-302110
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...