Jump to content
SAU Community

Gtr R33 Series 3 Low Price...,

Blitz_R33

By Blitz_R33,
in Classifieds

 Share

Recommended Posts

Blitz_R33 Mentor

Blitz_R33

Posted
Posted (edited)

It is time to sell my beloved GTR. It is in mint condition and mostly driven on wkends. The car was bought virtually stock. Not long after purchased a new HKS Twin Racing Exhaust which I have only seen it on one other GTR. The clutch was replace just over 6mths ago and oil is changed using Mobile 1 over 5000kms. A new set of Goodyear Eagle F1 (265/35/R18, $500each) tyres have been put on the rim and have only done about 200kms.

It has NEVER been boosted over stock boost (hence no boost controller) and ran a flat 13sec pass at willowbank (nearly ran 12.9 but i stuffed the launch). Lasted dynoed at Millennium Motorsport and got a reading of 215kW@all four wheels (not bad for a GTR thats virtually stock).

Series 3 GTRs are still rare in Australia. It comes with features like Xenon HID headlights as well as the last of and the strongest of the nissan 5 speed gearboxes with upgrade syncros from the factory.

The price im after is $35,000 But ono. Reasonable offers is very welcome and only serious buyers only please. Test drivers are welcome BUT must be over 25 (as my insurance does not cover under 25).

Recently got a compression test done and the results were 175 for all 6 cylenders..

Year: Late 1997 (Series3 - Rare as there are not many later model R33s, mostly 1995)

Colour: Black

KMs: Approx 95,000

Location: Brisbane

Specs

- Personal Plates [ZILLA] (CAMES WITH THE CAR)

- 215kW @ all 4 wheels (Stock boost)

- Xenon HID lights (only came on series 3)

- Dual Airbags,

- Mongoose Alarm,

- Stock RB26dett R33 Engine.

- Top Secret Gold Camgears (new timing belt when fitted)

- Trust/Grex Oilcooler and Relocator with thermostat

- Apexi Dual air filters (virtually new)

- Apexi Pen Turbo timer

- Nismo Z-Tune Carbon Fibre Bonnet

- Nismo Intercooler

- Nismo smoke side indicator

- Nismo 300km/hr dash

- Nismo 400R front bar (2 Piece)

- Exedy Heavy duty clutch (fitted about 7,000kms ago)

- V-Spec suspension.

- 18inch R34 wheels (Goodyear Eagle F1 265/35/R18 Virtually Brand new $500each)

- HKS Stainless Steel Racing twin exhaust, with 2 highflow cats (single pipes from each turbo, not your usual Y join type. Very rare exhaust, I have only seen it on one other GTR),

Stereo:

- Alpine DDDrive front splits (top of the range)

- Alpine V12 4Channel AMP

- Pioneer cd/tuner (3d LCD display 2005 model)

019.jpg

DSC05336a.jpg

DSC07680a.jpg

dsc08041.jpg

DSC01848a.jpg

DSC01852a.jpg

Edited by Blitz_R33
Link to comment
https://www.sau.com.au/forums/topic/146145-gtr-r33-series-3-low-price/
Share on other sites
  • 2 weeks later...
Oz Grand Master

Oz

Posted
Posted
Which bonnet is on the car?? Two different ones in pictures???

Interested....... have money in late January.

Dave the 1st pic is the later one with the 34 GTR wheels on it :P

Blitz_R33 Mentor

Blitz_R33

Posted
  • Author
Posted (edited)
Which bonnet is on the car?? Two different ones in pictures???

Interested....... have money in late January.

Hi. At the moment the car has the stock alloy bonnet fitted. For legal reasons, I have not put the carbon bonnet on it.

If you are interested, feel free to contact me anytime. I have not put it on carsales yet, just putting it on the forums to see if there are any interests. :P

PS. I was booked and fine for the carbon bonnet, the cops said it was illegal, but i could not find anywhere that said it was not legal to have it. My mate has a carbon bonnet and has never been fined.

Edited by Blitz_R33
Blitz_R33 Mentor

Blitz_R33

Posted
  • Author
Posted

I have decided to added the carbon Nismo Z-tune (copy) bonnet to the sale of the car.

Please note: in QLD the bonnet is could be illegal. I was booked and defected for it. My mate has a simular bonnet and has never been booked.

Oz Grand Master

Oz

Posted
Posted
I have decided to added the carbon Nismo Z-tune (copy) bonnet to the sale of the car.

Please note: in QLD the bonnet is could be illegal. I was booked and defected for it. My mate has a simular bonnet and has never been booked.

Bonnet needs to be ADR approved, only carbon bonnets that are ADS as yet are from "Custom Carbon" need to have a brace structure not just a top skin.

Rhinorebel Grand Master

Rhinorebel

Posted
Posted

Still very interested. Will contact early in the New Year for a look and possible drive. Also, what type of Mongoose alarm does it have??

Any interior pics??

Dave

Blitz_R33 Mentor

Blitz_R33

Posted
  • Author
Posted
Still very interested. Will contact early in the New Year for a look and possible drive. Also, what type of Mongoose alarm does it have??

Any interior pics??

Dave

No problems Dave, car will be waiting for you to come test drive :P

I think it is a Mongoose 200, it came with the car so im not 100% sure on the model. I will try n take some interior pics when it stop raining.

  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...