Jump to content
SAU Community

Recommended Posts

Due to popular demand, i have posted my personal drift settings for the game gran torismo 3.

ENJOY!!!!!!!!!!!!!!!!

This Setup works better on the following cars:

S13/S14/S15/180sx/R32GTST/ALTEZZA/FX7FC/TURENO

For other cars with different weight displacement, modifications need to be made to these settings.

Car Modifications:

- Full Racing Suspension

- Sports Brakes & Balance Controller

- Stage 3 Turbo

- Racing Intercooler

- Racing Muffler

- Sports Chip

- Port and Polish

- Full Engine Balance

- Full Racing Transmission

- Triple Clutch

- Racing Flywheel

- Carbon Driveshaft

- LSD Full Customize

- Weight Reduction Stage 3

Basically you need the best stage of all these modifications

"IMPORTANT"

Tires play a big part in this, you NEED simulations on the back and the best racing tires on the front.

Dont forget to set - ASM and TCS set to zero. That is, anti sway, and traction controol.

Settings:

SR - minimum /minimum

RH - minimum/minimum

Bound - 6 / 7

Rebound - 6 / 7

Camber - 6.0 / 1.0

Toe - -1.5 / 0.5

Stabs - 2 / 4

Brakes - Rear:9 / Front: 24

LSD: Initial = 20, Accel = 50, Decel = 20

With the Gear ratios, on stage 3 turbo, try and drop it down by about 3to 4. say your on 30, get it down to 27ish.

Link to comment
https://www.sau.com.au/forums/topic/14625-gt3-drift-settings-here/
Share on other sites

Altezza = RWD

FX7FC.. do you mean RX-7 FC? yes.

3. can we use a stage 4 turbo instead of a stage 3.. like on the S15, dont do that, way too much lag, and you need to lower the gear ratios, and with lotsa lag, compensated with gear ratios...it frys the tires WAY to easly, and its not as fun or realistic or easy.

4. are FD RX-7's any good?....yes.

  • 4 months later...

yeah the same with me. i set them with my standards then tune them after that... what settings do you use as your "Trial Tune"? the way i set mine is, Tires Super Soft in the front and Med in the rear, I get the best in ALL the mods. I tune the suspention slammed... then the bound and rebound one step down on the front, camber 0 front 3 rear, tranny i make the gearing to the middle for the max of both worlds :P , then i just play around with thows settings... after i do a trial run.

Originally posted by predator666

Does it feel like drifting in the game though? Or just a half-ass comparison

apparently GT4's engine should be able to much more accurate emulate drifto..

yeah it does it feels just like my car when i go sideways... its even more fun when you use a steering wheel with GT3 but GT4 WILL be better... i can wait
  • 3 weeks later...

I like using the 22B Subaru for drift.

Sounds crazy I know, but it is the best car I've used so far.

You need to have it fully modified with the best of everything, then you have to set the torque split to 10/90 and the ASM and TCS to 0. Also you have to use simulation tyres.

you mean you like to drift in free run mode?

or you use the A/B/C class cars in free run without mods?

unmodded car drifting?

predator666:, i gather you know what real drifting feels like....and yeh you get most of the feeling, apart from the inertia feelings you get in a real car...

i wish there was a GT3 meet or LAN style meet for this, cus id love to drift with the best in a 6 player shoot out.

perhaps we can all go get GOLIVE or whatever it is and play online with eachother heheh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...