Jump to content
SAU Community

Recommended Posts

^^^ Awesome!!

How do you go with the carbon bonnet? Any dramas with defects from the cops?? Also, if it rains, does the engine get drenched with water?

Did u just drill your number plate into the front bar?? Im thinking of moving mine up a bit from the stock position

Thanks champ! The bonnet is ok! Its only bad when i wash it so i put a towel on the engine and just be careful!!

Recently i was pulled over by the police for no reason i and he was checking the height of my car and i told him i have spent alot of money on my car to make sure it cant get detected and then he tapped the bonnet and said is this standard it is!!

Replied YES! Then he looked at me and said they come standard with a carbon bonnet do they??

I told him its a V-Spec 2 and yes it does come standard with a carbon bonnet, you can either get them painted the same colour as the car or leave it black, go check it up if u like!!

I said it with alot of confidence and he was like oohhh ok!!

Then let me off!

The number plate i drilled 2 holes down the bottom of the plate and i had to put a nut and use longer screws so it didnt touch the front bumper. looks heaps better!!!

A quick pic of mine in the garage. Will be fitting up Nismo side skirts and rear pods this Wednesday aswell as some Tein Monoflex coilovers. My wheels are on the way from Japan so once I get them fitted Ill post up some better pics.

Cheers

031aer4.jpg

Cool! Looks good

What wheels are u getting for the 34!

Pics Of my baby

Sorry for the re-sizing!!

I will post new pics this week with new suspen and such on lil run down on my car

R34 4 door

GTR Front Boonet

GTR Front Vendors

GTR Front Defuser

GTR Front Lights

Sunroof

5 speed man / turbo :D

Full Leather INT with everything re-trim

Bascily the only 4 door like this around :D

I will post new pics this week with new suspen and such on lil run down on my car

R34 4 door

GTR Front Boonet

GTR Front Vendors

GTR Front Defuser

GTR Front Lights

Sunroof

5 speed man / turbo :(

Full Leather INT with everything re-trim

Bascily the only 4 door like this around :(

So instead of going the eastbear way with the GTSR you went with genuine GTR parts yeah its a bit different. Would like to see the pics when there up.

Hey... Bit new on here and all... This is one of the only pic's I have of my new car, I'm just waiting for it to be released from quarantine. This is one of Garage East Bear's ex demo cars so at least I don't have to spend a lot of money on body kits :blink:

post-17465-1219215064_thumb.jpg

Hey... Bit new on here and all... This is one of the only pic's I have of my new car, I'm just waiting for it to be released from quarantine. This is one of Garage East Bear's ex demo cars so at least I don't have to spend a lot of money on body kits :blink:

Very Very nice car champ nice and clean good luck with getting it out!! they can be CNTS!

hey Bakes are u getting Gold GT-C??

And i hope now i can upload the pics i took on Sunday

NOPE STILL CANT UPLOAD PICS!!!!!! DOES ANYONE KNOW WHY!!!

Hey guys i dont know if it was just my computer but i couldnt access the Skyline website

and if would let me try to upload the pics for days

But finally i can

So these are the pics i took on Sunday

post-16690-1219272130_thumb.jpg

post-16690-1219272143_thumb.jpg

post-16690-1219272155_thumb.jpg

post-16690-1219272168_thumb.jpg

post-16690-1219272182_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...