Jump to content
SAU Community

Recommended Posts

19x10.5 +12 perfect fit no issues (besides not being able to fit bigger brakes)

What's the problem? Diameter clearance or spoke? Or disk type?

If those sizes don't fit. I won't be able to run Meisters.

What's the problem? Diameter clearance or spoke? Or disk type?

If those sizes don't fit. I won't be able to run Meisters.

I THINK its just the clearance on the GTR calipers but it can be overcome by a small 3mm spacer or something..That's what someone told me when getting my wheels...

NO problem doesn't need any spacers fit standard brakes perfect ! I meant later down the track can't run bigger callipers with those rims

Is it a diameter of rim or caliper to spoke clearance that will be the issue? Ie. will a 365 rotor 8piston Brembo fit.

Is it a diameter of rim or caliper to spoke clearance that will be the issue? Ie. will a 365 rotor 8piston Brembo fit.

I've got 6 piston Alcons with 365mm rotors on 19x10.5 +22 and have plenty of spoke clearance. When I had them fitted, I was told even 8 piston were fine.

I run Endless 6 piston at the front and Endless 4 piston at the rear.

The Volk TE37 in 19 x 10.5 +12 where the only rims that fit over the callipers with no spacers required.

Both the SSR SP1 and Work Meister in a 19 x 10.5 required 10mm spacers to clear the front callipers.

This all relates to offset though, I am unsure about the overall diameter, but do know that the Enkei NT03 in 18 x 10.5 did actually fit, both offset and diameter wise.

Here are some shots of these rims on the car...

Meister03_zpsde56b09a.jpg

SP102_zpsa9a5fe1d.jpg

NT0301_zpsd64838d5.jpg

I run Endless 6 piston at the front and Endless 4 piston at the rear.

The Volk TE37 in 19 x 10.5 +12 where the only rims that fit over the callipers with no spacers required.

Both the SSR SP1 and Work Meister in a 19 x 10.5 required 10mm spacers to clear the front callipers.

This all relates to offset though, I am unsure about the overall diameter, but do know that the Enkei NT03 in 18 x 10.5 did actually fit, both offset and diameter wise.

Here are some shots of these rims on the car...

Do you know what "disk" they were?

19x10.5 in Meisters come in multiple disks.

http://www.workwheelsusa.com/media/wheels/29/85/Meister%20S1%203P%20Spec.pdf

I know for a fact that 17x9.5 +12 lmgt4 and te37 fit all over a 8 piston brembo with 365 rotors. With plenty of room to spare.

Do you know what "disk" they were?

19x10.5 in Meisters come in multiple disks.

http://www.workwheelsusa.com/media/wheels/29/85/Meister%20S1%203P%20Spec.pdf

I know for a fact that 17x9.5 +12 lmgt4 and te37 fit all over a 8 piston brembo with 365 rotors. With plenty of room to spare.

Good question, no sorry, I am not sure.

This shot shows the clearance with the TE37's.

20121117_195107.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...