Jump to content
SAU Community

Recommended Posts

So Since I got my car I have only been getting about 250-300 km to a tank. Which is really bad and I cant figure out why, since I am shifting around 3500rpm and "took the lead out of my foot". My car doesn't have any engine upgrades beside splitfires, plugs, ssqv, intake. And yes I checked there is not a hole in the tank. Although the car does have a mines tuned ecu in it; so I am thinking that this may be what is causing this bad fuel economy since the car does seem to be running 8-9psi as well. I am in the middle of replacing a bunch of parts, a couple being a power fc and a new fuel pump. so I will have my fingers crossed that that might fix the problem. If anyone has any idea could you please post something.

thank you very much for your time.

Link to comment
https://www.sau.com.au/forums/topic/147342-bad-fuel-economy/
Share on other sites

Well ok so here are a few contributing factor.

O2 sensor is a bad one, i changed mine got an extra 50-80 kilometers in town, more on the higway

ECU temp sensor, if that is dead, then you will be running enritched maps. See if it is within spec, there is a post on this already.

A small spark plug gap is another one, i have to run 0.6mm now and it sux on fuel, new coils with a decent gap will increasy fuel economy drasticly.

Vacume leaks, when your car is idleing hot, the vac should be about 17mmHg, see if you have Vacume leaks.

Exhaust leaks will also suck through juce, so check for those.

Apart form that, the stock ecu is dam ritch, and if you get a tuned ecu or SAFC II to take some of the fuel out, you will get more power, better fuel ecconomy and less backfire.

Mines ECU tuned to run on 100ron? What ron does canada have?

Canadian octane ratings are PON, which is (MON+RON)/2. We can get 91 PON anywhere and 94 in some places. 91-94 PON is probably comparable to 96-98 RON, give or take.

JDM Mines tuned ECUs are not tuned for this fuel, but the OEM ignition retard smarts are still there and so protect us from ourselves.

Dan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...