Jump to content
SAU Community

Recommended Posts

Ok I'm just curious of the potential of standard turbo's for 1/4 mile racing.

Please list specs of mods WITH STANDARD TURBO'S.

me

- trust airfilters

-14psi

standard everything else

12.665

confirmed at benaraby raceway dragstrip

awaiting new run with dumps and exhaust and front pipes.

  • Replies 108
  • Created
  • Last Reply

Top Posters In This Topic

R33 GTR ('95) with:

- Apexi filters

- HKS front pipe

- 3'' high flow cat

- Dual N1 Apexi cat back exhaust

- 13 psi

- adj. cam gears

- standard clutch (slipping on 3rd and 4th run)

12.391 @ 107mph - Calder Park

Now have Nismo twin plate clutch, interesting to see difference

GAWD I CANNT WAIT!!!

I've already got :

HKS cat back exhaust

HKS Pods

Removed boost restrictor

Very soon I'm getting :

Power FC

Adjustable Cam gears

Inevitably at the same time I'm told a twin plate will need to replace the clutch that will turn to mash after I drive out of the tuners.

R33 GTR

HKS super Drager exhaust

HKS front pipe

HKS super power flow air filters

Apexi power fc (not tuned yet running very rich and pining very badly above 6000rpm far from ideal!)

13 psi boost

button clutch

huge custom intercooler 600x300x115 (not really needed at this power level)

Done on the worst dragstrip in australia

12.63@110mph

60ft 1.847

Personally, I ran 12.74 on stock turbos at 1 bar, air filters and Apexi GT Spec cat back exhaust and 4" Trust Drag IC. I suspect my slow time was due to running crap tyres and breaking traction all the way through 1st and second with a massive 208 Kw @ the wheels and a 60' of 2.3.

HIRISK, a regular on SAU ran 11.57 on stock GTR turbos earlier last year. Although he had other minor mods, the stock turbos held up fine.

Check out the article at http://www.fullboost.com.au/cars/featureca...tr32_shaun.html

Emre has also run 11 second runs on stock turbos with minor mods.

My 60' time was 1.850

Launched at 6500 rpm (standard clutch at the time, boy did it cop a beating that night, twin plate went in the following week coz of excessive slippage)

Running on 265/35/18 Bridgestone G'Grids

215 rwkws

Getting into 11's is not very hard and costly with GTR's... You need about 250kw at the wheels and 115mph.

I got 250kw with exhaust, cam gears and boost, everything else was stock.

Launches are very important but not tyre dependant to a great degree. I managed 1.77 and 1.73 sec. 60 foot times with Ziex's and 1.72 with Bridgestone 540's.

Theoretically yes, definitely.

You need to get the 1.7sec 60 foot and 115mph to do it in a GTR, with the same power but less weight GTS-T you should get more mph and be able to do it with a 1.8 60 footer. The trick is to nail that 60 foot and follow it with a very good run. Although i don't flat change you still have to be fairly aggressive with your gear changes. Considering we judge our cars' performance within that 0.1 of a sec. you gotta realize how clean you run has to be. Slow or missed gearchanges, loosing traction into 2nd or 3rd,hitting the rev limiter briefly will all cost you that 0.1 sec. or more that may be all the difference.

For comparison, i also did 12.1 @ 115 mph with 1.89 60 foot and 12.3 @ 115 mph with 2.05 60 foot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...