Jump to content
SAU Community

I Put My Sau Sticker On Today

Link

By Link,
in New South Wales

 Share

Recommended Posts

DANSR33 Mentor

DANSR33

Posted
Posted
Are you guys serious about graphics on the front and back windscreens being illegal.

I've got pratically my entire rear windscreen filled with a vinyl graphic (it is advertising of sorts haha), I thought it was okay to fill your rear windscreen as long as you have wing mirrors.... Thats why utes can carry loads in the back and trucks as well and that blocks your vision. As well as some sign companies are offering rear windscreen one way vision that cover the whole window.

It being illegal sounds like crap to me... When I worked in the sign industry we fill peoples rear windows heaps...

Well I haven't been hassled yet, I'm off to summernats in it so lets see what happens....

Hmmmm I was pulled over a couple of weeks ago and they didn't say anything, except told me my car was blury....

I believe if the car/van or ute is registered as a commercial then its ok for them...

but I could be wrong

ranicx Veteran

ranicx

Posted
Posted

the easyest way to put a sticker on the back window straight, is to clean the back window, then spray the area that you are going to put it on with soapy water, so when you place the sticker on, you can still move it. then use a spunge to get all the bubles out and leave it to dry. when its dry, carefuly remove backing and there ya have it. one dead straight good looking sticker :dry:

another great member and friend told me about that one and it works a treat... just give it alot of time to dry though or it wont stick :O

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...