Jump to content
SAU Community

My 32 4 Door Drifter - Stadium Drift Pics And 3071r Pics * Check Last Page*


Recommended Posts

Hey kids.. thought i'd show people what ive been up too, I got Toffy's old 32 4 door from tassie, it came with apexi coilovers, some mesh rims, final konnextion kit with mashed bar, Rb25 turbo, cooler exhaust and so on. Was a nice basic set up and the RB20 is in pretty good cond. So far i have been focusing on the suspension side of things to make the car handle and grip FAR better then my cefiro did on the track, and it works! Heres the lowdown.

-Brand new HSD coilovers with 8kg fronts and 5kg rears

-Whiteline Swaybars all round, 27mm front and 24mm rear both adjustable

-Drift shop rear camber arms and rear traction rods

-Alloy pineapples

-Hicas lock bar

Motor wise i have since ripped out the radiator that was in the car and fitted an RB25 rad, and put the stock shroud and thermo on as i had a few temp issues at a warm mallala prac night. I have since chucked on

-Highflow RB25 turbo with stage 3 wheel

-remapped ECU by Jeff from the Speed Lab

Dyno'ed at 205 rwkw on 15psi boost, comes on a lot better and makes more torque (slightly) then the KKR i used to have, i just need some GTR injectors to crank 230 rwkw.

Just got some new rims too,

2X Drift R's in 17X8 with awesome offset no spacers needed

4X Rays GT LM2's in 17X9 with +13 ish offset, currently has 255 rubber on them as they came off a GTR/ so they only on the back atm.

Whats the car like to drive? Awesome.. it grips so well. you can really put the power down hard through the corners and it just grips, Out at mallala its awesome to drift also as the car has a lot of grip mid corner, where as my Ceffy just squatted down and span up, With good 235's on the back of my car it wont spin up 1st off the line at all, where as the ceffy would spin 1st, 2nd and 3rd lol.

Now that the car is set up, i'll be giving it a respray (same colour, just a fresh coat) with GTR front bar and the FK skirts and rear bar. Should be hot. defo needs a respray now... i have a black rear right door after a sideways incident into a wooden reflector post... :laugh:

Some pics for now.

dsc4218bz6.jpg

1024530aj3.jpg

1024604de6.jpg

Edited by Simon-R32
  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

Hey, Looking nice. I love 4 drs But yeah really nice :P

What are FK sideskirts and rear bar? Could you show me please as I could be interested in purchasing a new rear bar in the new year.

Also are you getting a genuine GTR bar or just a copy? If a copy, how much and where from also? Thank you, Good luck.

-Jimmy.

Hey Jimmy

The Final Konnextion kit looks like this

nissan_img_02_b.jpg

nissan_img_02_a.jpg

no idea where you can get them from tho... my fronmt bar is smashed, so i was just going to get a GTR Copy, theres several people selling copies to suit a 32 gtst on forums etc. , they are about $350 ish

Edited by simon-ae86

Got bored so i put the kit on lol, along with the Rays wheels.

They are Rays LM GT2's in 17X9 all round, the rears have some crazy 255/40 rubber on them atm.. tad wide!

1004697im2.jpg

1004695to1.jpg

1004694dv5.jpg

Just need a front bar now :P

nah it didnt and yeah your right, they make a huge diff, but it doesnt stop there. to get the most grip you need to change the traction rods, camber arms, toe adjustors and swaybars and set them all up properly for them to work

its got a lot to do with the leading upper arm adjustments and getting both the camber, toe and length of the upper arm right to get the desired effect.

then theres spring rate, damper settings and getting the sway bar right.

i think its near spot on, i will be testing it at mallala in a few weeks.. if it works i'll let you know :()

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...